Detergents And Care; Products; Basic Operation; Switching On The Appliance - Siemens WD4HU542DN User Manual And Installation Instructions

Table of Contents

Advertisement

en Detergents and care products
13 Detergents and care

products

Notes
¡ You can find further information in
the digital instruction manual by
scanning the QR code in the table
of contents or on www.siemens-
home.bsh-group.com .
¡ Observe the information on safety
→ Page 4 and preventing material
damage → Page 10.
The manufacturer's instructions for
use and dosage can be found on the
packaging.
Notes
¡ Only use liquid detergents that are
self-flowing
¡ Do not mix different liquid deter-
gents
¡ Do not mix detergent and fabric
softener
¡ Do not use products that have ex-
pired or are highly congealed
¡ Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach)
¡ Use dyes sparingly as salt may
damage stainless steel
¡ Do not use bleaching agents in the
appliance
operation
14 Basic operation
operation
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .
30
14.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
The switch-on process takes a few
seconds.
Note: The lighting for the drum goes
out automatically.
14.2 Setting a programme
Press the required programme.
1.
→ "Programmes", Page 25
If necessary, adjust the pro-
2.
gramme settings.
14.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 30
Adjust the programme settings.
→ "Buttons", Page 22
Observe the information about op-
erating logic.
Note: The programme settings are
not saved permanently for the pro-
gramme.

Advertisement

Table of Contents
loading

Table of Contents