Page 1
MANUAL L-DN1254SAL-A (DINING TABLE) IMPORTANT Please take time to read these instructions thoroughly and follow each step carefully for safe and easy operation. Keep this manual to consumer for installer and consumer future reference/use. We would like to hear from you with any comments or suggestions. In the continental U.S.
Table of Contents Table of Contents ............2 Pre-Assembly ..............3 Safety Information ............2 Planning Installation ........... 3 Warranty ..............2 Hardware Included ........... 3 What is Covered ............2 Package Contents ............4 What is Not Covered ..........2 Assembly ..............
Pre-Assembly PLANNING INSTALLATION Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
Assembly (continued) Attaching the legs to support Attaching the assembly legs frame to table top □ □ Attach legs (B) to support frame (C) by with bolts (AA), Attach assembly legs (B) to table top (A) by with bolts spring washers (BB), flat washers (CC), don’t tighten all (FF), spring washers (BB), flat washers (CC), tighten all bolts in this step.
Page 6
Care & Maintenance Before using, clean the table completely with a soft dry towel. Do not put your chair in wet conditions where there is a risk of rust developing. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
Page 7
MANUAL L-DN1254SAL-A (SWIVEL CHAIR) IMPORTANT Please take time to read these instructions thoroughly and follow each step carefully for safe and easy operation. Keep this manual to consumer for installer and consumer future reference/use. We would like to hear from you with any comments or suggestions. In the continental U.S.
Table of Contents Table of Contents ............2 Pre-Assembly ..............3 Safety Information ............2 Planning Installation ........... 3 Warranty ..............2 Hardware Included ........... 3 What is Covered ............2 Package Contents ............4 What is Not Covered ..........2 Assembly ..............
Pre-Assembly PLANNING INSTALLATION Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
Assembly Connecting the support with Assemble the chair frame to chair frame the base □ □ Use bolts (AA) through the big pads (FF), spring board Insert the chair frame (A) into the base (C). (GG), flat washers (DD) and spring washers (CC) to assemble the support (B) to the chair frame (A), then NOTE: To avoid destroying the finish, please handle...
Page 12
Care & Maintenance Before using, clean the chair completely with a soft dry towel. Do not put your chair in wet conditions where there is a risk of rust developing. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
Need help?
Do you have a question about the L-DN1254SAL-A and is the answer not in the manual?
Questions and answers