Advertisement
Firmly hold the Scrubber Head Assembly with one hand and then press the selected scrubber head on until secured.
CAUTION:
- Apply water and a cleaning agent to the surface needing cleaning and/or the head of the Kogan SuperScrub 360° Brush.
- To Start cleaning, turn the button to the ON position while the scrubber head is in contact with the desired
cleaning surface. Hold the unit by its handle and gently press the scrubbing head to the surface to be cleaned.
- Do not press too hard. The product has been specially designed to do all the work.
- Operate the Kogan SuperScrub 360° only when it is touching the area being cleaned in order to limit spraying of water.
- Cleaning chemicals should be used only in accordance with instructions of manufacturer of the surface being cleaned,
Abrasive cleaners should never be used.
- First try the brush on an inconspicuous surface.
BRUSH HEAD ASSEMBLY
OPERATION
Before turning on the brush,
make sure to use proper eye wear
and glovoes to avoid eye and skin
contact from splatter.
3
Advertisement
