Page 2
WARNING First of all, we sincerely thank you for purchasing our product, pls Read and follow all the instructions in this “Use and Care” even if you feel you are familiar with the product, and find a place to keep it handy for future reference.
PRODUCT INORMATION 1. Main Handle 7. Top Extension Release Button. 2. ON/OFF Switch 8. Scrubber Head Assembly 3. Charging Cover 9. Charging Adapter(Australia Type to be used) 4. Charging Port 10. Dome Brush Head 5. Bottom Extension Release Button 11. Flat Brush Head 6.
- Do not press too hard. The product has been specially designed to do all the work. - Operate the Kogan SuperScrub 360° only when it is touching the area being cleaned in order to limit spraying of water. - Cleaning chemicals should be used only in accordance with instructions of manufacturer of the surface being cleaned, Abrasive cleaners should never be used.
Page 5
MAIN UNIT CLEANING - Clean all surfaces of the unit with a soft cloth - Only use a mild detergent to clean the unit. Do not use alcohol-based or abrasive cleaners - Aside from the unit’s brush head, do not submerge it, or shower it in water. - Separate all sections of the unit and allow it to air dry.
- Peel away the tape, unclip the red and black wires, and take out the battery, as shown in Figure 3 If you have further isues with Kogan SuperScrub 360° Brush or these suggested solutios do not help, please contact the Kogan.com customer support team.