Advertisement
1. Main Handle
2. ON/OFF Switch
3. Charging Cover
4. Charging Port
5. Bottom Extension Release Button
6. Extension Handle
Before assembling any component of this product, make sure the unit is set to OFF position.
Assembly without Extension Handle.
- Connect the main handle to the Scrubber Head Assembley until you hear a "CLICK"
Assembly with Extension Handle.
- Connect the main handle to the Extension Handle until you hear a "CLICK".
- Next, connect the Scrubber Head Assembly to the extension handle until you hear a "CLICK".
PRODUCT INORMATION
HANDLE ASSEMBLY
7. Top Extension Release Button.
8. Scrubber Head Assembly
9. Charging Adapter(Australia Type to be used)
10. Dome Brush Head
11. Flat Brush Head
12. Corner Brush
2
Advertisement
