Part 4 - Pool Installation - avenli RF-21-CZ2 User Manual

PART 4 - Pool Installation

IMPORTANT: If any parts are missing, do not start assembly. If you need replacement
parts, call your local customer service number.
Number of persons required for assembly: at least 2 adults.
Total length of installation excluding time required for site preparation and water
filling:
30 minutes for size F10'×30"/F12'×30"
•
45 minutes for size Ф14'x33"
•
Step 1. CHECKING THE COMPLETENESS OF DELIVERY
Remove all components from the box(es) and place them on the ground at the
mounting location. Check each component according to the "COMPONENT REFERENCE".
Check that all necessary components are present.
Step 2. INSTALLATION OF THE DRAIN VALVE COVER AND PLUG
Check that the outer drain plug is inserted into the outer drain cap and that the drain
valve cover is screwed on and tightened securely. Fit the plugs to the connecting holes.
(Drain plugs vary depending on pool size.)
Stopper Drain valve cover Drain plug A
11
Drain plug B