Wake-On-Lan Support (Wol) - HP xw4000 Network Manual

Network Communications Guide

Wake-On-LAN Support (WOL)

✎
✎
2
Wake-On-Lan (WOL) can be enabled and disabled in Windows 2000
and Windows XP.
To enable or disable Wake-On-Lan:
1. Select Start > Control Panel > Hardware > Device Manager >
NIC > Properties.
2. Select the Power Management tab.
3. Select or de-select Allow this Device to Bring the Computer
out of Standby.
Or,
1. Run Computer Setup by restarting the computer and pressing the
F10
key when "F10" appears in the lower right corner of the
screen.
2. Select the Advanced tab > Device Options > PME Wakeup
Events.
3. Using the right or left arrow key, select enable or disable.
For more information on Wake-On-LAN, refer to the online Desktop
Management Guide or to the Remote Management Administrators
Guide. The Remote Management Administrators Guide is included
with the Remote Management Setup Utilities and is available on the
Support Software CD or at
For information on WOL filtering, refer to any additional
documentation provided for the NICs advanced
diagnostics/configuration utility.
http://www.compaq.com.
Network Communications Guide