Electrical Parts - MrCool DIY-MULTI2-18HP230C Service Manual

3.2

Electrical parts

Antistatic gloves must be worn when you disassemble the electronic box.
WARNING:
Note: Remove the air outlet grille(refer to 1.1 Panel Plate) before disassembling electrical parts.
PCB Board 1
Procedure
1) Remove the screws of the ground
wirings. (3 screws) (
PCB_001-1 ).
2) Unfix the hooks and screw and then
open the electronic control box cover
(5 hooks and 1 screw)(see
PCB_001-2 ).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
CJ_Multi-
CJ_Multi-
 Outdoor Unit Disassembly 27
CJ_Multi-PCB_001-1
Top Cover
CJ_Multi-PCB_001-2
