Filling The Water Tank; Receiving Water From The Water Dispenser - DeLonghi DSBSDX16 Installation Instructions Manual

American style with water dispenser
Table of Contents

Advertisement

Available languages

Available languages

filling the water tank

Turn the small cap anticlockwise then remove it from the water tank.
Fill drinking water into the water tank.
Do not fill above the level, otherwise, it may overflow.
Before filling with water, ensure that the water tank is
steady and in a correct position.
Apart from drinking water, other beverages (such as milk,
juice, carbonated beverage, etc) are not suggested to be
used, especially beverages that include grain must not
be used (may result in blockage and damage).
Hot water must not be filled into the water tank directly.
Do not touch other parts of the unit when filling water, it
may lead to leakage.

receiving water from the water dispenser

You should use the type of container that can fit
under the water dispenser. Place the container
properly underneath and push on the lever for water
to flow.
Before you dispense the water, make sure the lock
device is at "Unlock" position.
Ensure to slide to "Lock" position after each
use to prevent children from playing with the
lever.
When at "Lock" position, do not push on
the lever with force. It will damage the
mechanism.
GB
15

Advertisement

Table of Contents
loading

Table of Contents