JVC AV-32X37SUE Service Manual page 18

AV-32X37SUE AV-32X37HKE
AV-32X37HIE AV-32X35HUE
AV-32X35HKE AV-32H35SUE
(3) METHOD OF SETTING
1) METHOD OF SETTING 1.IF
[1.VCO] : It must not adjust without signal.
Key
(a) [1]
(b) [1]
(c) [INFORMATION]
2) METHOD OF SETTING 2.V/C, 4.DEF AND 5.VSM PRESET.
Key
(a) [2~5]
(b) [FUNCTION UP /
DOWN (
(c) [FUNCTION -/+
( )]
(d) [OK]
(e) [INFORMATION]
Do not setting 3.AUDIO, 6.STATUS, 8.SURROUND, 9.SHIPPING (OFF) and 0.BUS FREE.
(4) RELEASE OF SERVICE MENU
After completing the setting, return to the SERVICE MENU, then again press the [INFORMATION] key.
1-18 (No.52107)
Select 1.IF
Select 1.VCO (CW)
Make sure that the arrow position between the ABOVE REF and BELOW REF.
Return to the SERVICE MENU screen.
Select one from 2.V/C, 3.AUDIO, 4.DEF and 5.VSM PRESET.
Select setting items.
)]
Set (adjust) the setting values of the setting items.
Memorize the setting value.
(Before storing the setting values in memory, do not press the CH, TV, POWER ON
/ OFF key if you do, the values will not be stored in memory.)
Return to the SERVICE MENU screen.
Function
Function