Advertisement
Troubleshooting
Engine Problems
PROBLEM (SYMPTOMS)
Engine does not start
Generator won't
produce power
31.
RECOMMENDED ACTION
1. Turn engine switch to "ON",
pull recoil starter.
2. Check fuel. Fill if empty. See pg
15 for more information
oil level. If low, add engine oil.
See pg 14 for more information.
4. Check sparkplug.
(TORCHA5RTC)
Clean if necessary or adjust/
replace gap. Gap: 0.6 - 0.7mm
(0.024 - 0.028") See pg 22 for
more information
5.
- See pg 26.
Carburettor - See pg 22.
See pg 24.
Maintain/service if necessary.
1. Check safety device (DC
protector) is "ON".
2. Turn safety device (AC) to "OFF".
Stop engine and re-start.
www.powertec.net.nz
PT3200i
3000W DIGITAL
INVERTER GENERATOR
IF PROBLEM PERSISTS
If all recommended
possible areas of
misadjustment have
been checked and
the problem persists,
contact your local
Powertec Authorised
Service Facility
Advertisement
