HP Visualize b132L Upgrade Instructions page 25

CPU_Upgrade.doc 23 Tue Jul 16 14:10:19 1996
Figure 19
6 Reconnect the floppy, SE SCSI, power, CD-ROM audio, and FW SCSIcables as
shown in Figure 19.
When connecting the floppy cable to the system board, use the following proce-
dure:
a Lift the locking ring on the connector to the up, or unlocked, position.
b Hold the cable with the blue stripe facing in the direction indicated
in Figure 19.
c While holding the locking ring in the unlocked position, insert the cable into
the connector until the blue line is even with the locking ring.
d Press down on the locking ring evenly on both ends until it snaps into the
down, or locked, position.
FWSCSI
Storage Tray
Power
SESCSI
CD Audio
Floppy Connector
Connecting the Storage Tray Cables
Replace the Storage Tray
23