Acorp 4845GE Manual page 54

Chapter 2
Reset Configuration Data
The system BIOS supports the PnP feature so the system needs
to record which resource is assigned and proceeds to get rid of
resource conflict. Every peripheral device has a node, which is
called ESCD (Extended System Configuration Data. This node
records which resources are assigned to it. If Disabled (Default)
is chosen, the system ESCD will update only when the new
configuration varies from the last one. If Enabled is chosen, the
system is forced to update ESCDs and then is automatically
reset to the "Disabled" mode.
Resources Controlled By
By Choosing "Auto" (default), the system BIOS will detect the
system resources and automatically assign the relative IRQ and
DMA channel for each peripheral. By choosing "Manual", the
user will need to assign IRQ & DMA for add-on cards. Be sure
that no IRQ/DMA and I/O port conflict exists.
IRQ Resources :
Press Enter to configure the following Submenus
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults
IRQ Resources
: PCI Device
: PCI Device
: PCI Device
: PCI Device
: PCI Device
: PCI Device
: PCI Device
: PCI Device
: PCI Device
: PCI Device
F7:Optimized Defaults
2-54
4845GE BIOS Setup
Item Help