HP Vectra XM5 4 Install Manual page 6

NOTE
Installing Novell NetWare Drivers
ODI DOS Client Driver
6 The Novell INSTALL program will display a window with the settings
for the card. The following parameters will be shown:
Optional Bus Identifier
Optional Media Frame Type(s)
Optional Node Address
Optional Media Type
Optional LAN activity LED
Press without selecting to override any parameters and
proceed with the remainder of the steps in the NetWare DOS
Requester INSTALL program.
7 The installation of the DOS ODI driver and NetWare client software
is complete. Refer to page 7 for information on how to start a
NetWare client.
The ODI driver default frame type is ETHERNET_802.2. NetWare 286
and 386 servers use frame type ETHERNET_802.3 as their default, but
NetWare 4.0 uses both ETHERNET_802.2 and ETHERNET_802.3
types. The HP Enhanced PCI Ethernet Interface supports both
Ethernet frame types.
6 English