Odi Dos Client Driver - HP Vectra XM5 4 Install Manual

NOTE
Installing Novell NetWare Drivers

ODI DOS Client Driver

ODI DOS Client Driver
The Novell ODI driver for DOS is used with many Novell products. It is
also used by DOS and Microsoft Windows 3.x computers to gain access
to Novell servers through one of the following:
NetWare DOS Requester (using Virtual Loadable Modules or VLMs)
or
NetWare DOS Shell (using NETX.EXE)
Both NetWare clients use an ODI driver to enable them to use the
Enhanced PCI Ethernet interface to access the LAN medium. File
service to all versions of NetWare servers is possible from either the
DOS Requester or DOS Shell clients. Access to enhanced services
provided by later versions of NetWare servers may require using the
DOS Requester. Other Novell products, like Personal NetWare and LAN
Workplace for DOS, also use the DOS ODI driver.
The DOS ODI driver is contained within the
directory of your LAN Disk, the contents of this directory are:
\NOVELL\DOSCLNT\PCNTNW.COM
\NOVELL\DOSCLNT\PCNTNW.INS
\NOVELL\DOSCLNT\NET.CFG
To install the ODI driver with DOS Requester (VLM.EXE), refer to
page 4.
To install the ODI driver with DOS Shell (NETX.EXE), refer to page 6.
For more information about Netware DOS Client, refer to the Netware
Client for DOS and MS Windows User's Guide and Netware Client
for DOS and MS Windows Technical Reference manuals provided
with your Novell software.
For more information about the NET.CFG file, refer to the Novell
NetWare manuals and to page 24.
When the DOS ODI driver is used, it will locate the HP Enhanced PCI
Ethernet Interface and read its settings automatically.
4 English
NOVELL\DOSCLNT