Chacon 34552 Quick User Manual page 6

4 PAIR THE CAMERA TO NVR
Wireless Setup
This section allows you to add the camera, if you have purchased addition cameras or change
Camera Audio Setup
original camera channel.
Volume Setup
Notes: Before leaving factory, the camera has been matched with monitor, the image will come
Wireless Setup
out when the kit is powered.
Wi-Fi
ABCD......
Hotspot list
Camera 1 Paired
Camera 2 Paired
Camera 3 UnPaired
Camera 4 UnPaired
Tips:
1. If the camera still does not match the code after the code has timed out, click "pair new
camera" again to try again.
2. If you need to replace a new camera, please click "X" to delete the channel and then click on
Camera 1
the code to match.
3. The Red LED will always on which indicate the camera have been paired successfully.
Camera 3
>
>
>
Screen OFF after 1 min
>
9c******* X Repeater
9c******* X Pair New Camera
X
X
Camera 2
Camera 4
Reset Button
1. Power on the cameras and
monitor and press reset
button
2. Enter the Camera Info in
the Main Page
3. Tap the match code
and camera would be
paired with Monitor
Automatically.