Make sure that the lug on the brake
2.
caliper bracket is positioned in the slot on
the swingarm.
Slot
Brake caliper bracket
Adjust the drive chain.
3.
Install and tighten the rear axle nut.
4.
Torque: 135 N·m (13.8 kgf·m, 100 lbf·ft).
Lug
After installing the wheel, apply the brake
5.
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
Swingarm
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tyre Puncture
Removing Wheels
u
P. 169
2
217