Basic Operation; Switching On The Appliance; Setting A Programme; Adjusting The Programme Settings - Siemens WM14VM69GR User Manual And Installation Instructions

Table of Contents

Advertisement

en Basic operation

Basic operation

13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Press
.
It may take a few seconds for the
appliance to switch on.
Note: The drum is lit up after the
door is opened and closed and once
the programme has started. The light
goes out automatically.
13.2 Setting a programme
Set the programme selector to the
1.
required programme.
→ "Programmes", Page 24
If necessary, adjust the pro-
2.
gramme settings → Page 38.
38
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 38
Adjust the programme settings.
→ "Programmes", Page 24
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 24.
Requirement: The laundry is pre-
pared and sorted.
→ "Laundry", Page 34
Open the door.
1.
Make sure that the drum is empty.
Load the laundry unfolded into the
2.
drum.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.

Advertisement

Table of Contents
loading

Table of Contents