Etco2 Setting; Temperature - INSIGHT Vital Signs Plus ECG Operator's Manual

3.9 ETCO2 setting

ETCO2 Set Up
CO2 Unit: Choose mmHg, kPa or %
Apnea Time(s): Set time - device will alarm when no air is detected.
Note: Monitor must detect 3 breaths before this timer is activated.
CO2 Save Time(s): Set how often monitor records ETCO2 data (in seconds)
CO2 Range: Choose how high the vertical axis (Y Axis) of the ETCO2 waveform
graph will display
ETCO2 Zero: Use this when connecting a new adaptor or resetting a current
adaptor. Pressing "OK" while ETCO2 zero is highlighted will start the operation.

3.10 Temperature

Under the setting menu, select the Temperature unit and press the confirm key to
enter the Temperature unit interface menu. The menu is shown in Figure 3-12.
Fig. 3-12 TEMP Setting
TEMP Unit: Celsius, Fahrenheit
21