HP Vectra E-Vectra Supplementary Manual page 8

HP e-Vectra
Item
2
1a Box assembly: includes cover assembly,
chassis assembly, HDD tray assembly, HDD
compartment cover, LED holder assembly)
2 Cable kit: includes HDD data cable, HDD
power cable and CD-ROM (data+power)
cable
3 Plastic parts kit: includes cover, HDD
compartment cover, stand foot, rubber feet
(not shown), port control system, blank
serial number label (not shown) and flyer
(not shown)
4 Status panel, fan and airflow guide
5 CD-ROM blank bezel and RFI shield (used
on models without CD-ROM drive)
6 Power supply
7 Power cord
8 IDE hard disk drive
8.4 GB
15 GB
9 24 Max IDE slim CD-ROM drive + tray
assembly
6 Max IDE slim DVD-ROM drive + tray
assembly
10 Enhanced mouse with scroll/zoom wheel
Standard keyboard
11 HP lock
12 Battery type CR2032
13 System board
not Sealing tape
shown
1. Replace both the power supply and the power cord.
2. Where "xxxx" is the code for your national power cord. See the localization matrix below.
3. For optional disk drive information, see the Accessory Service Handbook.
4. Where "xx" is the code for your national keyboard. See the localization matrix below.
2-6 HP e-Vectra
"Return to HP" Repair Parts List for HP e-Vectra
Description
3
(includes HDD tray)
Repl. Exchange
Part Number Part Number
5065-2512 —
5065-2513 —
5065-2560 —
5065-2511 —
5065-2561 —
1
0950-3796 —
1,2
8120-xxxx —
— D9618-69001
— D9616-69001
D9912-63001 —
D9913-63001 —
C4736-60101 —
4
C4739-601xx —
5064-2645 —
1420-0356 —
— D9497-69001
tbd —