Specifications - Makita DHR263 Instruction Manual

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Indicator lamps
5 Check button
6 Battery indicator
7 Switch trigger
8 Lamp
9 Reversing switch lever
10 Quick change chuck for SDS-
plus
11 Change cover line
12 Change cover
13 Spindle

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Battery adapter
Cord connected battery pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
6
Explanation of general view
14 Quick change drill chuck
15 Rotation with hammering
16 Rotation only
17 Hammering only
18 Grip base
19 Teeth
20 Loosen
21 Tighten
22 Side grip
23 Protrusion
24 Bit shank
25 Bit grease
26 Bit
27 Chuck cover
Model
Concrete
Steel
Wood
–1
)
Net weight
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH / DC18WC
28 symbol
O
29 Action mode changing knob
30 Depth gauge
31 Dust cup
32 Blow-out bulb
33 Chuck adapter
34 Drill chuck
35 Sleeve
36 Ring
37 Limit mark
38 Brush holdre cap
39 Screwdriver
DHR263
26 mm
13 mm
32 mm
0 – 1,250
0 – 5,000
350 mm
4.1 – 5.1 kg
D.C. 36 V
BAP182
BL36120A
DHR264
374 mm
4.2 – 5.1 kg