Table of Contents
Advertisement
1. Switch the first device on.
2. Press the
The number (= current sub-channel) flashes on the display.
3. Set the required channel using the
There are 99 sub-channels to choose from.
If you do not require a sub-channel, select OF.
Press and hold the
the numbers more quickly.
4. Press TALK to save the setting. Or wait until the number
stops flashing on the display. The sub-channel has been
saved.
5. Set the other device to the same sub-channel as described.
Adjusting speaker volume
1. Switch the device on.
2. Set the required volume using the
The selected volume is displayed in the form of a bar
symbol
Setting the ringtone
You can choose between 10 different ringtones.
1. Switch the device on.
2. Press the
CA will appear on the display along with the corresponding
number of the ringtone.
3. Use the
ringtone.
4. Press TALK to save the setting.
button twice.
.
button four times.
and
buttons to select your preferred
or
button to scan through
16
and
buttons.
and
buttons:
Advertisement
Table of Contents
