Table of Contents
Advertisement
Batteries are almost completely flat.
Batteries are flat and must be replaced.
If the batteries are almost completely flat, the battery
symbol will flash continuously and the walkie-talkie will
beep. The device will then switch off automatically.
If a device is switched on when the batteries are almost
flat, the empty battery symbol will appear at first as an
indication that the batteries need to be replaced.
Standby mode
If no buttons are pressed for 6 seconds, the walkie-talkies
will automatically switch to battery-saving standby mode.
However, they will remain ready to receive a signal and will
switch back to standard mode once a signal is received.
Connecting headphones or earphones
Electrically adapted headphones or earphones can be
connected to the headphone port with a 2.5 mm jack plug
(not included).
Once headphones or earphones are connected, the speaker
is switched off.
Follow the safety warnings in the user manual for the head-
phones or earphones.
12
Advertisement
Table of Contents
