Table of Contents
Advertisement
Inserting batteries
Each walkie-talkie is operated using 4 batteries.
1. Remove the belt clip above the battery compartment.
2. Open the battery compartment by placing your thumb
on the recessed grip, pressing down gently on the battery
compartment lid, and then sliding the battery compart-
ment lid down to remove it.
3.
4. Put the battery compartment lid back on correctly and
slide it upwards. You should hear and feel it lock into
place. Reinsert the belt clip if required.
5. Repeat this procedure with the other device.
Changing the batteries / capacity status
The batteries' capacity status is shown in the display
and is also indicated acoustically.
Batteries are full.
Batteries are 2/3 full.
Insert the batteries as shown on the
base of the battery compartment.
Ensure correct polarity (+/—) when
doing so.
11
Advertisement
Table of Contents
