Summary of Contents for Tchibo 605 193
- Page 1 Walkie-Talkies M E N M E N M O N M O N Instructions for use Tchibo GmbH D-22290 Hamburg · 111938FV05X00XI · 2020-10...
- Page 2 Yet the walkie-talkies are not just suitable for outdoor use. The VOX function also means they can be used as a baby monitor. We hope you enjoy using these walkie-talkies. Your Tchibo Team www.tchibo.de/instructions (Please enter the product number in the box labelled “Bedienungsanleitungssuche” and click on “Suchen”)
-
Page 3: Table Of Contents
Contents 4 About these 17 Setting the button tone instructions 17 Setting the confirmation signal 5 Safety warnings 17 Setting the voice control 7 Technical specifications (VOX function) 19 Use 8 At a glance (features) 19 Sending the call alert 10 Prior to first use tone 10 Unpacking... -
Page 4: About These Instructions
About these instructions This product is equipped with safety features. Nevertheless, read the safety warnings carefully and only use the product as described in these instructions to avoid accidental injury or damage. Keep these instructions for future reference. If you give this product to another person, remember to also include these instructions. -
Page 5: Safety Warnings
Safety warnings Intended use • Keep the packaging material out of the reach of children. The walkie-talkies enable There is a risk of suffoca- low-interference voice tion! You should also store contact between users over small parts (e.g. the belt short to medium distances. - Page 6 CAUTION - material • Ensure correct polarity damage (+/–) when inserting the batteries. • Protect the devices from impacts, falls, dust, mois- • Clean the contacts on the ture, direct sunlight and batteries and device as extreme temperatures. required before insertion. Never immerse the devices Danger of overheating! in water or other liquids.
-
Page 7: Technical Specifications
2.5 mm jack plug (not included) Ambient temperature: +10 to +40 °C Made exclusively for: Tchibo GmbH, Überseering 18, 22297 Hamburg, Germany We reserve the right to make technical and optical modifications to the appliance in the course of product improvements. -
Page 8: At A Glance (Features)
At a glance (features) Front Antenna Headphone port Light Display On/Off switch for light On/Off switch Scan button Menu button MENU Selection button Selection button Signal search Call alert tone button MON button Send button TALK Microphone/ Included: speaker – 2 walkie-talkies Not illustrated: –... - Page 9 Back Belt clip Battery compartment...
-
Page 10: Prior To First Use
Prior to first use Unpacking DANGER to children – danger to life due to suffocation/choking • Keep all packaging material out of the reach of children. Dispose of it immediately. Store small parts (e.g. the belt clips) out of the reach of small children. Removing and inserting the belt clip Each walkie-talkie comes with a belt clip, which you can attach or detach as required. -
Page 11: Inserting Batteries
Inserting batteries Each walkie-talkie is operated using 4 batteries. 1. Remove the belt clip above the battery compartment. 2. Open the battery compartment by placing your thumb on the recessed grip, pressing down gently on the battery compartment lid, and then sliding the battery compart- ment lid down to remove it. -
Page 12: Standby Mode
Batteries are almost completely flat. Batteries are flat and must be replaced. If the batteries are almost completely flat, the battery symbol will flash continuously and the walkie-talkie will beep. The device will then switch off automatically. If a device is switched on when the batteries are almost flat, the empty battery symbol will appear at first as an indication that the batteries need to be replaced. -
Page 13: What You Need To Know
What you need to know • Your walkie-talkie set comprises two identical radio communication devices. Both devices can be used for transmitting and receiving and are equipped with the same functions. • In order to be able to communicate with each other, the devices must be set to the same channel. -
Page 14: Basic Settings
Basic settings Switching on and off M To switch on, press and hold the On/Off switch until you hear a beep and the entire display lights up briefly. The following information is shown on the display: – Selected channel and sub-channel or OF –... -
Page 15: Setting The Channel
Setting the channel In order for participants to communicate, the walkie- talkies must be set to the same channel. 1. Switch the first device on. 2. Press the button. The number (= set channel) flashes on the display. 3. Set the required channel using the buttons. -
Page 16: Adjusting Speaker Volume
1. Switch the first device on. 2. Press the button twice. The number (= current sub-channel) flashes on the display. 3. Set the required channel using the buttons. There are 99 sub-channels to choose from. If you do not require a sub-channel, select OF. Press and hold the button to scan through the numbers more quickly. -
Page 17: Setting The Button Tone
Setting the button tone 1. Switch the device on. button five times. tO will appear on 2. Press the the display. 3. Press to switch the button tone on (ON), and to switch it off (OF). 4. Press TALK to save the setting. Setting the confirmation signal The confirmation signal will sound automatically as soon as you release the TALK button. - Page 18 The walkie-talkie will also switch to transmission mode when it picks up other noises. For this reason, we recommend not using the VOX function in a loud or windy place. 1. Switch the device on. 2. Press the button three times. The last selected setting and the VOX symbol will appear on the display.
-
Page 19: Use
Check that both devices are set to the same channel and sub-channel before use. Sending the call alert tone You can, for example, send the call alert tone as an agreed signal (e.g. for “Everything OK here”) or as an announcement that you will shortly be sending a message. -
Page 20: Searching For Weak Signals (Monitor Function)
Please note: As soon as your walkie-talkie is “called” by another walkie-talkie, the receiving symbol will appear on the display. This symbol will appear when the other person ends their message. An acoustic signal also sounds. You may now send your own message. You cannot send and receive a call alert tone and a message at the same time. -
Page 21: Switching On The Display Lighting
This function may be useful if the walkie-talkies are clearly transmitting on different channels, but you do not know which ones. M Press the scan button SCAN will appear on the display. The walkie-talkie now continuously scans all 8 channels from 1 up to 8 and shows each of these on the display. -
Page 22: Switching The Light On And Off
Directive 2014/53/EU at the time of its being placed on the market. The complete Declaration of Conformity can be found by entering the product number 605 193 at www.tchibo.de/anleitungen. This product may be purchased and used in the following countries: Germany, Austria, Switzerland, Czech Republic, Poland, Slovakia, Hungary and Turkey. -
Page 23: Problems / Solutions
Problems / solutions • No reception. • Are both devices switched on? • Are the batteries flat? • Has the same channel been set on both devices? • Poor reception. • Are the batteries flat? • Are the devices over 3000 metres apart? •... -
Page 24: Disposal
Single-use batteries and rechargeable batteries must not be disposed of along with household waste! You are legally obliged to dispose of any flat batteries at a local authority collection point or to return them to a battery retailer. Product number: 605 193...