Table of Contents
Advertisement
upper right comer, the system is in the running state and the screen will display values
like timer, temperature measured inside the chamber.
•
At any time, you can always manually stop running by pressing the
seconds.
7.7 Setting the Deviation Alarm and Timer
•
On the controller panel, press and hold the
•
Press
key to confirm, press
•
TIMER WAIT: ON/OFF of waiting temperature. When 'ON' the waiting temperature is
available. When 'OFF' no waiting temperature is available.
•
ALM Temp: Setting of temperature deviation alarm: when the measured temperature >
set temperature +ALM TEMP, an audible alarm will sound.
•
RH Temp: Setting of the upper limit for Temperature Control.
•
Timer: When the time is set as 0, timing function is not available.
When other than 0 is applied the controller is in 'Timer' function.
Version 1.0
key for 4-5 seconds.
or
key to move, press
User Manual
button for 4-5
key to return.
18
Advertisement
Table of Contents
