Table of Contents
Advertisement
Connecting
Connect the connection terminals securely. If the terminals do not go in smoothly, they may be reversed.
Check the terminal orientation. Do not insert terminals with excessive force. Doing so may result in
malfunction.
When removing the connection terminals, hold the connector part to pull out. Pulling the cable may
result in connector damage.
Connection Precautions
Be sure to disconnect the ⊖ terminal of the vehicle's battery before connecting the power cable.
To prevent fuming and damage to the product, be sure to first securely connect the black lead wire (Ground)
of the product to the metal part of the vehicle body.
Connect separate black lead wires (Ground) for products with high current consumption. When setting up
connections all at once, there is a risk of fuming or damage to the product when screws loosen or come off
completely.
Always use the included parts as specified. There is a risk of product failure if other parts are used.
WARNING
When handling the cables, DO NOT run cables near the driver's feet as they may interfere with the opera-
tion of the vehicle, potentially resulting in serious injury or death.
Main Unit
4 m (13 ft. 2 in.)
Yellow 1 m (3 ft. 3 in.)
Fuse (2 A)
(F 2 A L/250 V)
Red 1 m (3 ft. 3 in.)
Fuse (0.5 A)
(F 500 mA L/250 V)
Black 1 m (3 ft. 3 in.)
Connection terminal connection and removal
Connection diagram
Connect to a power terminal.
+ Battery power supply (Yellow)
Always connect to a power circuit that is supplied with
power from the battery regardless of whether the vehicle
engine switch is ON or OFF.
Accessory power supply (Red)
Connect to a power circuit supplied with power when the
vehicle engine switch is turned to the ACC position.
Never install the accessory power supply to a vehicle that
does not have an ACC position on the engine switch.
Doing so may lead to a dead battery.
Ground (Black)
Securely connect to a metal part of the vehicle body.
Pioneer Dash Camera
(sold separately)
Connect the red and yellow lead wires to the terminals
after wiring through the vehicle's fuse unit.
When replacing the fuse, be sure to only use a fuse of the
rating prescribed on this product.
Do not connect leads for other devices between the power
lead fuse and the device mounted in the vehicle.
Advertisement
Table of Contents
