AMG AMG350-4G-1C-1S Series Installation Manual

AMG AMG350-4G-1C-1S Series Installation Manual

Industrial unmanaged switch

Advertisement

Proud to be a British
AMG Systems Ltd. 3 The Omega Centre, Stratton Business Park, Biggleswade, SG18 8QB, UK
T :: +44 (0) 1767 600 777 E :: sales@amgsystems.com
www.amgsystems.com
D33426-00
AMG350-4G-1C-1S SERIES MODELS
AMG350-4G-1C-1S
AMG350-4G-1C-1S
Industrial 6 Port Unmanaged Switch 4 x 10/100/1000Base-T(x) RJ45
Ports, 1 x 10/100/1000Base-T(x) RJ45 or 100/1000Base-Fx SFP
Combo Port, 1 x 100/1000Base-Fx SFP Port, DIN Rail / Wall Mount,
-40°C to +75°C, 12-56VDC Power Input
AMG350-4GAT-1C-1S-P120
Industrial 6 Port Unmanaged PoE Switch 4 x 10/100/1000Base-T(x)
RJ45 Ports with 802.3at 30W PoE, 1 x 10/100/1000Base-T(x) RJ45 or
100/1000Base-Fx SFP Combo Port, 1 x 100/1000Base-Fx SFP Port,
DIN Rail / Wall Mount, -40°C to +75°C, 48-56VDC Power Input
Manufacturer
AMG350-4GAT-1C-1S-P120
AMG350-4G-1C-1S Series
Industrial Unmanaged Switch
www.amgsystems.com

DIN RAIL MOUNT INSTALLATION

SURFACE MOUNT INSTALLATION

① Remove
the DIN
rail clip by
unscrewing
the two fixing
screws as
shown.
② Attach the
wall brackets
using the
M3x4 fixing
screws
(included) as
shown.
Installation Manual - Hardware
③ Fix the unit to the surface
using two appropriate screws
(not provided)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMG350-4G-1C-1S Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AMG AMG350-4G-1C-1S Series

  • Page 1 Industrial Unmanaged Switch Installation Manual - Hardware Proud to be a British Manufacturer AMG Systems Ltd. 3 The Omega Centre, Stratton Business Park, Biggleswade, SG18 8QB, UK T :: +44 (0) 1767 600 777 E :: sales@amgsystems.com www.amgsystems.com www.amgsystems.com D33426-00...
  • Page 2 LED INDICATORS POWER Model Type Voltage 12-56 VDC Non-PoE Models PoE Models 48-56 VDC Model Type Power 6 Port Models 6W Max* *Excludes PoE Load *Non-PoE Model Only Fault relay is normally closed and will open on either power failure. If used with a single PSU, the PSU should be wired to both power inputs.

Table of Contents