Related Manuals for Range Servant HOPPER-4
Summary of Contents for Range Servant HOPPER-4
- Page 1 ENGLISH INSTRUCTION MANUAL HOPPER HOPPER-4 HOPPER-11 HOPPER-15 HOPPER-22 HOPPER-30 HOPPER-50...
-
Page 2: Table Of Contents
CONTENTS General information Preface EC Declaration of Conformity Description 1.3.1 Hopper 1.3.2 Ball Management System Identification Technical specifications Safety General Conformity with mandatory requirements Remaining risks Authorised use Unauthorised use Emergencies 2.6.1 Fire Operational reliability How to use the Hopper Necessary qualifications Design and function General... - Page 3 Factory testing and configuration Installation of the hopper Spare parts Outfeed mechanism Retailers and representatives Head Office Your Sales Representative Title: Instruction Manual_Hopper-E.doc Prepared by: Ferenc Dali Date: 9/10/2007 Number of words: 3075 Version: - 3 - Instruction Manual – Hopper English...
-
Page 4: General Information
Range Servant AB hereby undertakes to provide a warranty on material and function on the RANGE SERVANT dispenser for one year from the date of delivery. The guarantee does not cover payment systems and wearing parts. This engagement applies to repaired or replaced components for a period of three months. -
Page 5: Ec Declaration Of Conformity
1.2 EC Declaration of Conformity In accordance with the Machine Directive 89/392/EEC, annex IIA. The Manufacturer: Range Servant AB Skallebackavägen 11 SE- 302 41 HALMSTAD Sweden The Representative: (To be filled out by a representative established within the EU) .................... -
Page 6: Description
1.4 Identification When contacting Range Servant, please identify your machine with the help of the information contained in the identification plate. The identification plate is well visible and firmly attached and contains the following information: •... -
Page 7: Technical Specifications
1.5 Technical specifications General * Hopper Hopper Hopper Hopper Hopper Hopper Capacity [balls] 4000 11000 15000 22000 30000 50000 [up to] Dimensions: Height [mm] /([in]) 1005 1582 2307 2307 2307 2307 (39.6) (62.3) (90.8) (90.8) (90.8) (90.8) Height with elevator 1915 2481 2481... - Page 8 Fig. 2: Hopper-11 and Hopper-22 with elevator Fig. 3: Hopper-22 The level of airborne noise has been measured for an identical machine under normal operating conditions. The values indicate the sound pressure level measured 1 m from the sides of the machine and 1,6 m from the floor or access platform.
-
Page 9: Safety
Accessories and spare parts that have not been approved by Range Servant can lead to personal injuries and/or equipment damage and affect the operational reliability of the machine. -
Page 10: Authorised Use
They are intended for your machine, they have been chosen for safety reasons and they are approved by the manufacturer. Damage caused by the use of accessories and spare parts not having been approved by Range Servant or damage due to unauthorised technical changes are not covered by the warranty obligation. English Instruction Manual –... -
Page 11: Emergencies
2.6 Emergencies 2.6.1 Fire Water shall be used as an extinguisher in the event of fire, except if the fire is located in the electric equipment, where a carbon dioxide extinguisher must be used. 2.7 Operational reliability For trouble-free operation and long service life the instructions below should be followed: •... -
Page 12: Design And Function
All essential parts of the Hopper are manufactured of stainless steel, rust protected steel or aluminium. The Range Servant Hopper has been designed in order to provide driving range owners with a long-lasting, reliable, practical and economic golf ball management system. -
Page 13: Main Components
4.3 Main Components 4.3.1 Hopper with outfeed mechanism Fig. 6: Hopper with outfeed mechanism Pos. Designation Hopper Outfeed mechanism English Instruction Manual – Hopper - 13 -... -
Page 14: Hopper
4.3.2 Hopper Fig. 7: Hopper Pos. Designation Grid Back sheet Side sheet / Left Side sheet / Right Front sheet Inner sheet Top sheets English Instruction Manual – Hopper - 14 -... -
Page 15: Outfeed Mechanism
4.3.3 Outfeed mechanism Fig. 8: Outfeed mechanism Pos. Designation Brush Hopper outfeed sheet Motor Sensor Eccentric Bearing English Instruction Manual – Hopper - 15 -... -
Page 16: Maintenance
5 Maintenance 5.1 General Range Servant will provide accessories and original spare parts together with competent advice. Maintenance carried out correctly minimises defects and ensures maximum service life and reliable operation. Any malfunctions are detected at an early stage and are therefore easily corrected. -
Page 17: Troubleshooting And Repair
5.4 Troubleshooting and repair Although the operation of the machine is most reliable, problems may arise for various reasons. Attention! To reduce the time spent on troubleshooting, always start by checking that cables and connections are clean and tightened. SYMTOMS POSSIBLE DEFECT CORRECTIVE MEASURES Check / start the filling sysytem... -
Page 18: Spare Parts
7 Spare parts In this chapter you will find detailed drawings of the ball dispenser showing the location of the different spare parts. The tables accompanying the drawings contain information about spare parts number and designation and the quantity of each spare part installed per machine model. -
Page 19: Retailers And Representatives
8 Retailers and representatives The following list contains all the necessary information concerning the Range Servant representative closest to where you live. The list is continuously updated on our home page http://www.rangeservant.com 8.1 Head Office Sweden Range Servant AB Skallebackavägen 11...
Need help?
Do you have a question about the HOPPER-4 and is the answer not in the manual?
Questions and answers