Advertisement
Available languages
Available languages
EN
Safety instructions
Read the manual thoroughly and observe the information contained when using the device. Keep the manual close by for future reference.
Refer to the information sheet enclosed for important information on the subjects of safety, disposal, guarantee and product care.
Intended Use
The product is designed for use both indoors and outdoors. The product is intended purely for private use and not for commercial purposes or other usage.
The portable lamp is not suitable for lighting rooms within a household.
Observe the Safety Information
Read and observe all the safety information to protect yourself and the environment from any harm. Refer to the information sheet enclosed for the relevant
information on safety.
WARNING! RISK OF FATAL INJURY THROUGH ELECTRIC SHOCK!
NEVER use the power adapter (12) if you suspect damage to the power adapter (12) or see damage to the power adapter (12).
• Do not put the device into operation if it is damaged.
• Never open or repair the power adapter (12) yourself.
• Never touch the bare contacts with metallic objects.
• Never plug in or unplug the power adapter (12) with wet hands.
Technical Data
Mode:
Output:
Battery:
Runtime:
Beam Distance:
Recharge Time:
Waterproof Level:
Operating instructions
IMPORTANT! RISK OF PROPERTY DAMAGE THROUGH ENVIRONMENTAL INFLUENCES!
Unfavourable environmental influences could cause damage to the power adapter (12) or impair its function.
• Prevent exposing the device to environmental influences such as smoke, dust, vibration, chemicals, moisture, heat or direct sunlight.
• The power adapter (12) is not waterproof so keep it dry.
General View
Charging the Portable Lamp
The portable lamp is equipped with a permanently built-in Li-ion battery. The battery must be fully charged before being used for the first time.
The four blue LEDs of the status indicator (7) indicate the charge status of the Li-ion battery.
1. Open the protective cover covering the connection ports (6).
Underneath is one port for a coaxial plug and one USB-A port.
2. Connect the USB cable (11) to the port for a coaxial plug.
3. Connect the USB cable (11) to the power adapter (12) supplied via the USB-A port.
4. Plug the power adapter (12) into a power socket.
2
High-Low-Top LED-OFF
800Lm-210Lm-55Lm
3,6V 6000mAh Li-Ion
3,5Hrs (High)-12Hrs (Low)-30Hrs (Top LED)
13m
5Hrs
IPX4
1) Magnet (in base)
2) Base (pivoting)
3) Hooks
4) Magnet (at rear)
WWW.BORMANNTOOLS.COM
5) Press switch
9) Spotlight
6) Connection ports
10) Working light
7) Status indicator
11) USB cable (with coaxial connector)
8) Housing
12) Power adapter*
* Not included with all models
Advertisement
