Smeg SO6104S4PN Manual page 20

Medium
Sets a medium difference between the probe
temperature and oven cavity temperature. This
results in a medium cooking time.
fast
Sets the largest difference between the probe
temperature and the temperature of the oven
cavity. This results in a shorter cooking time.
3. Touch the CONFIRM
the selected probe temperature.
Press the
cooking .
With preheating:
1. Touch the START
heating.
After pre-heating, a buzzer will sound and a
message will display to indicate that the food
can be put in the oven.
2. Insert the tip of the temperature probe into
the food to be cooked.
For best results, make sure that the metal
part of the temperature probe is inserted
almost completely into the food at a
right angle, but make sure that it does
not touch the tray underneath.
3. Open the appliance door.
4. Insert the tray on which the food has been
placed into the appropriate guides.
5. Insert the plug of the temperature probe into
the socket at the side, using the probe to
open the protective cover.
914779723/A
button to confirm
button to eliminating the
button to start pre-
6. Close the door.
7. Touch the START
cooking using the temperature probe.
Without preheating:
1. Touch the PRE-HEATING
disable pre-heating.
2. Open the appliance door.
3. Insert the tray on which the food has been
placed into the appropriate guides.
4. Insert the plug of the temperature probe into
the socket at the side, using the probe to
open the protective cover.
5. Close the door.
6. Touch the START
cooking using the temperature probe.
End of cooking parameters with the
temperature probe
Cooking ends when the instantaneous
temperature reaches the target temperature set
by the user.
The heating elements are switched off and the
appliance emits a series of beeps.
1. Open the door.
2. Remove the probe from the food and unplug
it from the socket.
3. Remove the food from the oven.
4. Make sure that the protective cover is
properly closed.
5. Close the door.
Quick Mode (models with knobs only)
This mode allows you to set a traditional
cooking function and its temperature
quickly using the knobs.
It is also possible to quickly set the
probe cooking function.
The pre-heating function cannot be
disabled when Quick Mode is being
used.
Cooking can be interrupted at any time
by turning the function knob and the
temperature knob to 0.
1. Turn the Function knob
Temperature knob
button to start
button to
button to start
and the
back to position 0.
USE - 85