Access To The Terminal Board - Smeg FSP9610X-1 Manual

The aforementioned power cables
are sized taking into account the
coincidence factor (in compliance
with standard EN 60335-2-6).

5.6 Access to the terminal board

Access via the plate
To connect the power supply cable, access
to the terminal board on the rear cover:
1. Remove the screws securing the lid to the
rear cover.
2. Slightly turn the lid and remove it from its
housing.
48
Installation
3. Install the power supply cable.
4. At the end, reposition the lid on the rear
cover and secure it with the previously
removed screws.
Loosen the cable fastener screw
before installing the power supply
cable.