Safety Notes - VESALA PKT2 User Manual

1

Safety notes

To avoid possible harm, read and follow these instructions.
DANGER: Risk of death, personal injury, or property damage
Attaching the device to an elevated position may be dangerous if the attachment fails. Notice
that moisture, dirt, surface properties, ambient temperature or aging may reduce the reliability
of the supplied adhesive putty or affect the amount of adhesive putty required to reliably attach
the device to a surface. If possible, restrict access to the hazard zone under the device when the
device is attached to an elevated position. Always secure the device with additional supports if
the device is attached to an elevated position, and it is possible that persons or animals may
enter the hazard zone under the device. When the device cannot be reliably secured and the
hazard zone under the device cannot be completely restricted, it is required that anyone
entering the hazard zone under the device wears adequate personal protection equipment.
Always remove the device before drilling.
DANGER: Risk of electric shock, fire, or property damage
Drilling a structure may damage a dangerously live electric cable or a pressurised pipe. Before
drilling a structure, make sure the structure doesn't contain dangerously live cables or
pressurised pipes. If their existence cannot be excluded, the whole installation containing the
structure should be de-energized and de-pressurised before drilling begins. In some cases, a
decrease in locating accuracy may move the intended drill point.
3 (20)
User Manual Vesala Transmitter PKT2 X2.0 ENG