Hitachi RAS-25CNH2 Service Manual page 16

HOW TO EXCHANGE THE BATTERIES IN THE REMOTE CONTROLLER
1
Remove the cover as shown in the figure and take out the
old batteries.
2
Install the new batteries.
The direction of the batteries should match the marks in the
case.
CAUTION
!
1. Do not use new and old batteries, or different kinds of batteries
together.
2. Take out the batteries when you do not use the remote controller
for 2 or 3 months.
3. The batteries must be of the LR03 type.
=
– 15 –
Push and pull to the
direction of arrow