Bosch Professional GSA 18V-32 Original Instructions Manual page 15

a)
(13) Battery release button
(14) Saw blade receptacle
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw
Article number
Rated voltage
A)
No-load stroke rate n₀
Tool holder
Stroke
Max. cutting depth
– In wood
– In steel (unalloyed)
– Pipe diameter
Weight according to EPTA-Pro-
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation and during
storage
Recommended batteries
Recommended chargers
A) Measured at 20−25 °C with rechargeable
battery GBA 18V 12Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 87 dB(A); sound power level
98 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑11:
Cutting boards with saw blade S 3456 XF:
2 2
a = 10 m/s , K = 1.5 m/s ,
h,B
Cutting wooden beams with saw blade S 3456 XF:
2 2
a = 13 m/s , K = 2 m/s .
h,WB
(The specifications for cutting boards apply to a workpiece
thickness of 38 mm.)
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
Bosch Power Tools
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
GSA 18V-32
working period.
3 601 FA8 1..
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
V= 18
not actually being used should also be taken into account.
−1
min 0–2500
This may significantly reduce vibration and noise emissions
SDS
over the total working period.
mm 32
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
mm 230
and organising workflows correctly.
mm 20
mm 175
Rechargeable battery
B)
kg 3.8−4.8
Charging the battery
°C 0 ... +35
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
°C −20 ... +50
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
GBA 18V...
ProCORE18V...
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
GAL 18...
does not damage the battery.
GAX 18...
The lithium-ion battery is protected against deep discharge
GAL 36...
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
Do not continue to press the On/Off switch after the
u
power tool has automatically switched off. The battery
can be damaged.
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
The rechargeable battery has two locking levels to prevent
the battery from falling out if the battery release button is
pressed unintentionally. The rechargeable battery is held in
place by a spring when fitted in the power tool.
Battery charge indicator
The green LEDs on the battery charge indicator indicate the
state of charge of the battery. For safety reasons, it is only
English | 15
1 609 92A 81F | (21.07.2022)