Advertisement
F
STEP 4
Turn unit over to its upright
position.
Attach Arm Handles (J) to
unit with Head Cap Bolts.
Slide Arm (K) into
position.
Insert Adjustable Pins
into side panels at
desired level.
Place Shelf (M) into position.
Assembly Instructions 3/6
Head Cap Bolt
Wood Screw
Non-Locking Caster
Locking Caster
M
Attach Base (F) to unit with Head Cap Bolts.
Note: Arrow label indicates front of Base (F).
Attach Casters to unit with Wood Screws into
pre-drilled holes, with Locking Casters at front.
Arrow label at front
Head Cap Bolt
STEP 3
(See Figure 2)
Figure 2
J
K
Adjustable Pin
J
Advertisement
