Advertisement
IMPORTANT
Ÿ
Use a soft cloth between these parts and the floor.
Ÿ
Do not use power tools above 8 volts to assemble.
Ÿ
Do not tighten all the bolts until each part is properly assembled.
Ÿ
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Back Rail (D) to Side Panel (C)
with Head Cap Bolt. (See Figure 1)
Slide Back Panel (I) into position.
Attach Back Upright (H) to unit.
Slide Back Panel (I) into position.
Attach Back Rail (G) to unit with Head Cap Bolt.
Attach Front Rail (E) to unit with Head Cap Bolt.
Figure 1
Assembly Instructions 2/6
B
Head Cap Bolt
C
G
I
H
D
E
Head Cap Bolt
STEP 2
Attach Side Panel (B) to
unit with Head Cap Bolts.
I
Advertisement
