Sandstrom S92PDT12E Quick Start Manual

Quick Start Guide
GB
Dual 9" Portable DVD Player
Thank you
for purchasing your new Sandstrøm DVD Player.
Please follow this quick start guide for a successful first time set up.
We recommend that you spend some time reading the instruction manual in order to fully
understand all the operational features it offers.
Read all the safety instructions carefully before use and keep the instruction manual for
future reference.
1
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose
of it please do so according to local regulations.
The following items are included:
DVD Player x 2 Remote Control x 2
STEP SEARCH MUTE SOURCE
1 2 3 4
5 6 7 8
9 0 10+
DISPLAY
MENU
SUBTITLE ANGLE AUDIO /PBC
TITLE
ENTER MODE
SETUP VOL - VOL +
REPEAT SLOW
PROGRAM ZOOM
SOURCE
Mains Adapter x 1 Car Power DC+AV Cable x 1
Adapter x 1
Car Mounting Screws x 8 Instruction Manual x 1
Kit x 2 (ø4 x 25mm)
S92PDT12E
2
Battery Replacement for the Remote Control
1. Slide and hold the battery release tab
in the direction of the arrow.
2. Pull out the battery compartment
and remove the old battery.
3. Replace with a new battery.
4. Insert the battery compartment back
into the remote control.
Install the battery correctly by following the polarity (+ and –) indications in the battery
compartment.
3
In-Car Use
Using the DVD Players A and B Together (in-car use)
To playback on both DVD players A and B together, use the car power adapter
(included) to connect both units to the car's cigarette lighter socket.
Earphones x 2
DVD Player A
left side
3.5mm to RCA
AV Converter x 1
1 To DC IN
9V-12V socket
Quick Start Guide x 1
1
2
3
4
DVD Player B
left side
2
To the cigarette
lighter socket
Car Power Adapter
(included)
1
To DC IN
9V-12V socket
4
Mounting the DVD in a Car
For car headrests which cannot Grip the DVD firmly with both
1 2
be removed, use the following hands and slot the angled
method to secure the car support firmly into the support
mount: bar. It will click. Ensure the
entire unit is secure.
Horizontal
support bar
Installation Guide
Mounting Kits
DVD Player A
(hidden by DVD units)
SOURCE
DC cable
Remote Control A
STEP MUTE SOURCE
1 2 3 4
5 6 7 8
9 0 10+
DISPLAY
SUBTITLE AUDIO MENU
TITLE
VOL- VOL+
REPEAT SLOW
ZOOM
5
Basic DVD Playback
1. Slide the ON/OFF switch to the ON position
on both the DVD players A and B.
2. Slide the OPEN latch to open the disc tray.
3. Hold the disc by its sides and carefully place
onto the disc holder with the label side
facing to the front panel. Gently push the
disc down until you hear a "click" sound.
4. Close the disc cover. The unit starts
playback if the disc does not have any
menus recorded on it. If the disc has one or
more titles recorded on it, a menu screen
will appear on the screen.
5. To play a title, press the / 0-9 / 10+ buttons on the remote
control to highlight the title and then press the ENTER button on the
remote control to confirm.
You will find that there are many exciting features available.
Tip:
To get to know all these features, please take some time to read
the instruction manual provided.
DVD Player B
SOURCE
Car Power
Adapter
Remote Control B
STEP MUTE SOURCE
1 2 3 4
5 6 7 8
9 0 10+
DISPLAY
SUBTITLE AUDIO MENU
TITLE
VOL- VOL+
REPEAT SLOW
ZOOM
OPEN
SOURCE
QSG-S92PDT12E-130228V1-1