Sandstrom S95PD11E Quick Start Manual

Quick Start Guide
GB
9" Portable DVD Player
Thank you
for purchasing your new Sandstr m 9" Portable DVD Player.
Ø
Please follow this quick start guide for a successful first time set up.
We recommend that you spend some time reading the instruction manual in order to fully
understand all the operational features it offers.
Read all the safety instructions carefully before use and keep the instruction manual for
future reference.
1
Unpacking
Remove all packaging from the unit. Retain the packaging.
If you dispose of it please do so according to any local regulations.
DVD Player Remote Control
(with battery)
REPEAT/ REPEAT
POWER DISPLAY
PROG A-B
AUDIO/
ANGLE
SUBTITLE/
TITLE
MENU/
ZOOM
STOP/
SLOW SETUP
VOL– ENTER VOL+ GOTO
SETUP BACKLIGHT
MENU SOURCE
SOURCE MUTE
OK
OPEN
Car Power Adapter
3.5mm to
RCA AV Cable
Carry Bag Instruction Manual
S95PD11E
2
Removing the Insulating Strip from the Remote Control
Remove the insulating mylar strip from the battery if the battery is
being used for the first time. It is located at the bottom backside of
the remote control.
REPEAT/
POWER DISPLAY
PROG
AUDIO/
ANGLE
SUBTITLE/
TITLE
MENU/
ZOOM
STOP/
SLOW
ENTER
VOL– VOL+
SOURCE MUTE
3
Charging the Battery
1. Connect the mains adapter to DC IN socket on the unit then connect
the mains adapter to the mains socket.
• The LED indicator lights up red indicating that the battery is in
Mains Adapter
charging mode. When the battery is charged to full capacity, the
LED indicator goes green.
2. Remove the mains adapter. The battery is now fully charged and the
unit is ready to use.
Right side of the DVD Player
Earphones
Quick Start Guide
Battery Operation time from fully charged battery = Approx. 3.5 hours
REPEAT
A-B
SETUP
GOTO
To the mains socket
Power adaptor
Mains Adapter (included)
4
Power Supply
Using the Mains Adapter
(for indoor use)
Right side of the DVD Player
Using the Car Power Adapter
(for in-car use)
Right side of the DVD Player
Car Power Adapter (included)
5
Basic DVD Playback
1. Slide the ON/OFF switch to the
ON position.
2. Slide the OPEN switch to open
the disc cover.
3. Hold the disc by its sides and
carefully place onto the disc
holder with the label side facing
up.
Gently push the disc down until
you hear a "click" sound.
4. Close the disc cover. The unit
starts playback if the disc does not
have any menus recorded on it.
If the disc has one or more titles recorded on it, a menu screen will
appear on the screen.
5. To play a title, press the / 0-9 buttons on the remote
control to highlight the title and then press the
unit or the remote control.
You will find that there are many exciting features available.
Tip:
To get to know all these features, please take some time to read
the instruction manual provided.
To the mains
socket
Power adaptor
To Cigarette
Lighter Socket
button on the
QSG-S95PD11E-130606V5