Casanoov TANKER B700 Manual page 10

EN
Installation of Extended End Motor Arms to Gates
USE BUBBLE LEVEL
Extended arm - 1 cm
K
G
D
!
Before installing : extend the motor's arm to its maximum size then retract inside
around 1cm.
Ensure that the Post bracket height is in the same exact level with the gate bracket
height.
Failing to ensure accurate common heights will cause the motor arm to bend leading to
failure. Also, the force to push or pull the gate will be reduced causing the motor to open
or close the gates with difficulty or may not operate successfully at all. Severe different
in height will damage the motor and the motor arm.
10