JETWAY NF632N Series User Manual page 35

*Note: 'Hyper-Threading' item may or may not show up, depending on different
CPU.
Intel Virtualization Technology
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], a VMM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
Hardware Prefetcher
Use this item to turn on/off the MLC streamer prefecher.
The optional settings: [Disabled]; [Enabled].
Adjacent Cache Line Prefetch
Use this item to turn on/off prefeching of adjacent cache lines.
The optional settings: [Disabled]; [Enabled].
Intel(R) SpeedStep(tm)
This item allows more than two frequency ranges to be supported.
The optional settings: [Disabled]; [Enabled].
Turbo Mode
Use this item to enable or disable processor Turbo Mode.
The optional settings: [Disabled]; [Enabled].
'Turbo Mode' item may or may not show up, depending on different
*Note:
CPU.
CPU C States
Use this item to enable or disable CPU power management. This item allows CPU
to go to C states when it's not 100% utilized.
The optional settings: [Disabled]; [Enabled].
Package C State Limit
Use this item to select the maximum Package C State limit setting.
The optional settings: [C0/C1]; [C2]; [C3]; [C6]; [C7]; [C7S]; [C8]; [C9]; [C10];
[CPU Default]; [Auto].
[CPU Default]: Leaves to factory default value.
[Auto]: Initializes to deepest available Package C State Limit.
 SATA Configuration
30