HP Pavilion 442 Quick Start Manual page 49

Standby mode also allows faxes to come
through to the computer, and it enables the PC
to automatically retrieve e-mail messages and
download information from the Internet, if you
have programmed the computer to do so.
To manually put the computer in standby:
1 Press the Standby button on the keyboard.
The screen goes dark, and the computer goes
into standby mode.
2 When you want to use the computer again,
press a key on the keyboard, or press the
Standby button. The screen display reappears
just as you left it.
24
HP Pavilion home PC
Another way to manually put the computer into
standby is to:
1 Click Start on the taskbar.
2 Click Turn Off Computer.
3 Click Stand By.
If the computer does not work properly when
you wake it from standby, reset the computer:
press and hold the On button on the front of the
PC for approximately 5 seconds until the system
turns off. Then turn the computer back on.
Note:
Using the On button to reset the system is not
recommended and should be used only as a
last resort.