Table of Contents
Advertisement
Using Your Fire GL 8800 39
Adding a new application profile:
Click the Add button in the Configuration Profiles section and
enter the new application for which you want to set the configuration
parameters.
Modifying the configuration parameters:
To change the configuration settings of a specific application, for
example, CATIA, select the application from the list in the
Configuration Profiles section and click the Modify button. To
remove the selected configuration profile completely, click Delete.
Note: You cannot delete the factory-set configuration profiles.
If you add or modify a configuration profile, select or clear the
checkboxes the Settings section according to your requirements.
Default Settings
Enable 8-Bit double-buffered Overlay Planes
Use 8 bits of each 32-bit frame buffer pixel as double-buffered
overlay planes.
Force copy swap
Force blit copy from back to front buffer.
Wait for vertical retrace
Buffer swap 'synched' to vertical retrace. Enable this function for best
picture quality. If you disable 'Wait for vertical retrace' you may
experience visual artifacts such as tearing. However, this function
may be disabled for performance benchmarking.
Click the Apply or OK button to enable your Configuration
settings.
Advertisement
Table of Contents
