ATI Technologies P Class 450/500/550/600/650/700/750 User Manual page 33

Select your Primary Monitor. The primary monitor is the left
2
monitor or top monitor, respectively, of a multiple-monitor
desktop. Monitor icon 1 is for the monitor connected to the VGA
connector, monitor icon 2 is for the monitor connected to the
DVI connector.
Select your Desktop Setup
3
Select Disable Secondary Monitor if you want to work in
single-monitor mode with the primary monitor.
Select Clone Mode if you want the display of the primary
monitor duplicated on the second monitor.
Select Extended Desktop Horizontal if you want to see the
left section of your display on the primary monitor and the right
section on the second monitor.
Select Extended Desktop Vertical if you want to see the
upper section of your display on the primary monitor and the
lower section on the second monitor.
The Extended Desktop settings will deselect the
hiding modes that the computer cannot display option
Note
in the Monitor panel. Do not reset this option manually
if you have an Extended Desktop enabled.
4 Select the Window Placement settings
Check Use HydraVision for Placement to define your
window placement with the
management software.
HYDRAVISION™ installation is an option of the video
Note driver installation and may not be automatically
installed on your system.
Fullscreen
Select if you want a full screen window displayed On all
monitors, or only on the Current monitor - that is the monitor
where your mouse cursor currently is.
Using Your Fire GL 8800 29
HYDRAVISION™ desktop