Table of Contents
Advertisement
EVOLVE Wall mount kit
2.
3.
4.
(40 - 55 lb-in)
Notice!
Safety point
i
As an added safety measure, Electro-Voice recommends the user install and secure the
secondary auxiliary support cable to a different structural support point. This safety point
should have as little slack as possible (less than 25 mm/1 in. is preferable).
Electro-Voice
Attach the truss mount bracket with clamps to the desired support point.
1
Attach and secure the clips to the back of the EVOLVE column with two screws and nuts.
Install the screw at the top of the clips. Do not fully insert the screw until the handle part
of the truss mount bracket is in place.
4.5 - 6 Nm
2
Installation Manual
Wiring and installation | en
3
HEX 5mm
2022-03 | 02 | F.01U.401.529
21
Advertisement
Table of Contents
