Table of Contents
Advertisement
16
en | Wiring and installation
4.3.1
Installing the wall part
To install the wall part of the bracket:
1.
2.
3.
4.
Notice!
i
Consult an engineer and install fasteners according to the hardware manufacturer.
Caution!
It is the installer's responsibility to determine and use the proper mounting hardware for the
!
wall construction type.
Disregarding this caution could result in damage to the product and personal injuries may
occur.
2022-03 | 02 | F.01U.401.529
Separate the two pieces of the wall bracket by unscrewing the two bolts on the side.
Use a bubble level to align the wall part on the wall.
Mark the position of the screw holes with a pen.
Attach the wall part to the wall with the mounting screws.
Installation Manual
EVOLVE Wall mount kit
Electro-Voice
Advertisement
Table of Contents
