Advertisement
24.05.22, 16:09
Get started
These are the steps to get your new S1F2 payment terminal up and running. Some steps include a link to more detailed instructions.
1.
Inspect the terminal.
2.
Insert the paper roll:
Press on the sides of the paper roll cover and open the cover.
Place the paper roll and close the cover, making sure the paper sticks out a bit over the contactless logo on the casing.
3.
Turn on the terminal: Connect the terminal to a power supply, then press and hold the power button until the display turns on.
Let the battery charge for at least four hours while you continue with the next steps.
4.
On the Welcome screen, select your language.
5.
Connect the terminal to your network.
6.
On the Con rm store screen, assign the terminal to your store by selecting the check mark button. If the store shown is not your store, use the
edit button to change it.
If the store screen doesn't show, wait until the next synchronization with the Adyen platform (on average three hours) and try
again.
When you have completed these steps, you are ready to process payments!
Watch this video showing the getting started steps:
How to unbox your S1F2 terminal
von
02:21
Inspect the terminal
Because payment terminals process sensitive card data, you must verify that the terminal you received is the correct one, supplied by Adyen, and hasn't
been tampered with.
1.
Verify that the box containing the terminal hasn't been opened and that the security seal is intact.
The security seal is a red label with a bar code and a number, stuck across the lid of the box.
2.
If you have access to the Adyen Customer Area, log in and under Point of sale > Orders and returns nd the order for your terminal. Then:
Verify that the serial number (S/N) on the box is the same as in the Customer Area.
Verify that the security seal number on the box is the same as in the Customer Area.
Using the track & trace link, track the order with the carrier to verify that they con rm having delivered the payment terminal.
3.
Break the security seal, take the terminal out of the box, and verify that the serial number (S/N) on the terminal is the same as the serial
number on the box.
4.
Inspect the terminal for tampering. Check for missing seals or screws, additional wires or labels, holes in the device, and anything inserted in
or attached to any part of the terminal.
If any of the above checks fails, contact our POS Support Team immediately.
Connect to your network
https://docs.adyen.com/point-of-sale/user-manuals/s1f2-user-manual
Adyen
S1F2 user manual | Adyen Docs
3/6
Advertisement
