Planet Networking & Communication Modbus Gateway Series User Manual page 43

The page includes the following fields:
Object
•
Enable Mail Alert
• SMTP Server
• SMTP Server Port
• SMTP Login
Information
• From
• To
Alert Events:
Object
• Cold Start Alert
• Warm Start Alert
• WEB Login Failure
Alert
Description
To Enable SMTP function. The default value is "Disable".
Set port number of SMTP service. The default number is "25".
Type the SMTP server name or the IP address of the SMTP server address.
Username: Enter your login name for the SMTP Server.
Password: Enter your password for the SMTP Server.
Enter the sender's e-mail address. This address is used for replying e-mails.
Enter the receiver's e-mail address.
Description
To Enable the Cold Start Alert. The default value is "Disable".
Message: Enter the message of the e-mail. The default subject is "Cold Start Alert".
To Enable the Warm Start Alert. The default value is "Disable".
Message: Enter the message of the e-mail. The default subject is "Warm Start Alert".
To Enable the WEB Login Failure Alert. The default value is "Disable".
Message: Enter the message of the e-mail. The default subject is "WEB Login Failure
Alert".
43
User's Manual of MG-11x Modbus Gateway Series