4.2.5 Console
This page is to configure management methods for web and remote console. The screen in
The page includes the following fields:
Object
•
Web Console
• Remote Console
• Current Time
4.2.6 Email
The page shows SMTP configuration. The screen in
operation. If users want to send the alarm message out that contains "Log-Fail Warring", it will need to configure parameters
here.
Figure 4-2-5: Console Setup Page Screenshot
Description
To enable or disable access to the web console. The default is Enable.
To enable or disable access to the remote console. The default is Enable.
To check whether the reset button is working or not. The default is No.
Figure 4-2-6
Figure 4-2-6: SMTP Setup Page Screenshot
42
User's Manual of MG-11x Modbus Gateway Series
appears. You may set up SMTP mail parameters for further
Figure 4-2-5
appears.