1. Manuals
  2. Brands
  3. Planet Networking & Communication Manuals
  4. Network Hardware
  5. NVR-1600
  6. User manual

Planet Networking & Communication NVR-1600 User Manual

Н.265+ 16-ch 4k network video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H.265+ 16-ch 4K Network Video Recorder
NVR-1600
H.265+ 16-ch 4K Network
Video Recorder
NVR-1600
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVR-1600 and is the answer not in the manual?

Questions and answers

Related Manuals for Planet Networking & Communication NVR-1600

Summary of Contents for Planet Networking & Communication NVR-1600

  • Page 1 H.265+ 16-ch 4K Network Video Recorder NVR-1600 H.265+ 16-ch 4K Network Video Recorder NVR-1600...
  • Page 2 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Copyright Copyright  2023 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer...
  • Page 3 H.265+ 16-ch 4K Network Video Recorder NVR-1600 radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged...
  • Page 4 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment.
  • Page 5 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Revision User’s Manual of PLANET H.265+ 16-ch 4K Network Video Recorder Model: NVR-1600 Rev: 1.0 (June, 2023) Part No. EM-NVR-1600_v1.0...
  • Page 6 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Declaration Copyright ©2023. All rights reserved. Without the written permission of the company, any company or individual should not extract, duplicate part of or all of contents of this manual and no spreading in any form.
  • Page 7 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Please transport, use and reserve the equipment within allowing humidity (10%~90%) and temperature (-10℃~+55℃).  When cleaning the device, unplug the power cord and completely shut off the power.  The dust on the circuit board inside the NVR may cause a short circuit after being exposed to moisture.
  • Page 8 H.265+ 16-ch 4K Network Video Recorder NVR-1600  If you connect the product to the Internet at your own risk, including but not limited to products that may be subject to cyber-attacks, hacking attacks, virus infections, etc., the company will not be responsible for product abnormality, information leakage, etc., but the...

  • Page 9: Table Of Contents

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Contents Chapter 1 Outlines and Features .............. 13 1.1 Outlines ....................13 1.2 Default ....................14 1.3 Descriptive content agreement ............15 1.4 Function Features ................16 Chapter 2 NVR Appearance ..............20 2.1 Front Panel ..................
  • Page 10 H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.4.2 Playback assistance function ........... 54 5.5 Search ....................59 5.5.1 Video ..................59 5.5.2 Smart ..................61 5.5.3 Picture ..................63 5.5.4 Log .................... 65 5.6 Config ....................66 5.6.1 Easy Mode ................66 5.6.1.1 System Config ..............
  • Page 11 H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.5 Playback ................... 198 6.6 Picture ....................201 6.7 Config ....................203 6.7.1 System Config ................ 203 6.7.1.1 Local Configuration ............203 6.7.1.2 Common Config ............203 6.7.1.3 User Config..............206 6.7.2 Network Config ............... 207 6.7.2.1 Basic Config ..............
  • Page 12 H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.8.6 Channel Information ............... 228 6.8.7 Log ..................229 Chapter 7 Appendixes ................230 7.1 Q&A....................230 7.2 Maintenance ..................232...

  • Page 13: Chapter 1 Outlines And Features

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Chapter 1 Outlines and Features 1.1 Outlines This product is a new generation of high-performance NVR (Net Video Recorder) independently developed by PLANET. It adopts several high-tech technologies, such as video and audio codec technology, embedded system technology, storage technology, network technology and intelligent technology.

  • Page 14: Default

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 1.2 Default  The factory default super administrator account is admin and the password is admin. NVR factory default IPv4 address: 192.168.0.20. ...

  • Page 15: Descriptive Content Agreement

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 1.3 Descriptive content agreement In order to simplify the description in this manual, the following wordings are made: The "device" mentioned in this manual mainly refers to the NVR.   The "IP device" mentioned in this manual mainly refers to IP Camera.

  • Page 16: Function Features

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 1.4 Function Features NVR features are as follows:  H.264 video compressed format, supporting 4K/6M/5M/4M/3M/2M/1080P/720P/D1 resolution network camera input.  G.711U, G711a, ADPCM_DVI4 audio compressed format.  Each channel supports three-stream encoding. ...
  • Page 17 H.265+ 16-ch 4K Network Video Recorder NVR-1600  16-channel NVR supports 1 / 4 / 8 / 9 / 16 screen preview.  Supports adjustment of the preview channel order by dragging the mouse.  Supports preview manually or auto-tour preview, automatic polling cycle can be set.
  • Page 18 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Multiple playback modes: Play / Pause, Reverse, Stop, Single Back, Single Forward, Speed Down, Speed Up, support for mouse drag positioning.  You can select any area of the screen to zoom in locally.
  • Page 19 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Various alarms can trigger pop-up alarm prompts, voice warnings, and send emails to notify users.  Other Local Functions Other Local functions features below:  Users can quickly and easily set the system parameters by NVR buttons frontal, USB mouse.

  • Page 20: Chapter 2 Nvr Appearance

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Chapter 2 NVR Appearance 2.1 Front Panel Figure 2-1 Name Description Power Indicator The device is powered on normally Shows whether the device is properly Network Indicator connected to the network Shows whether the hard drive is connected...

  • Page 21: Rear Panel

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 2.2 Rear Panel The schematic diagram of the rear panel of the NVR-1600 is as follows: Figure 2-2 The corresponding description of each interface in Figure 2-2 is shown in the following table:...

  • Page 22: Mouse Description

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 2.3 Mouse Description Operate NVR through mouse left button, right button and scroll wheel． Mouse Function actions 1. Select one of the options 2. Insertion cursor, enter or modify the value of a...

  • Page 23: Input Method Introduction

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 2.4 Input Method Introduction Input method includes lowercase and uppercase English letters. Clicking " " button on the left can switch the input method and the symbol " " represents deleting incorrect input, as shown in Figure 2-3 and Figure 2-4.

  • Page 24: Chapter 3 Connecting Nvr

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Chapter 3 Connecting NVR 3.1 Hard Disk Installation CAUTION  Before installation, please confirm that the power has been disconnected.  Please use the NVR dedicated monitor hard drive recommended by the device manufacturer.

  • Page 25: Device Connection

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 3.2 Device Connection Use VGA cable or HDMI cable to transmit the NVR signal to the display as shown in Figure3-2. Figure3-2 CAUTION  Devices with built-in PoE network ports support IPC plug-and-play functionality.

  • Page 26: Chapter 4 Nvr Startup

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Chapter 4 NVR Startup 4.1 System Initialization The steps to turn on NVR are as follows: ○ 1 Connect the device to the monitor and plug in the mouse and power cord. ○ 2 Turn on the power switch on the rear panel to start the device. The system initialization screen appears, as shown in Figure 4-1.
  • Page 27 H.265+ 16-ch 4K Network Video Recorder NVR-1600 After the device starts up, it can be simply configured through the boot wizard, which is the normal operation of the device.

  • Page 28: Boot Wizard

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 4.2 Boot wizard 4.2.1 Quick Startup Wizard Quickly configure the NVR as shown in Figure 4-2: ○ 1 Select the system language by drop down menu on web upper right corner. ○ Figure 4-2...
  • Page 29 H.265+ 16-ch 4K Network Video Recorder NVR-1600 ○ 2 Then select a user, enter the password, select the system language and click "Login" to login the system (the default username is admin, and password is admin). ○ Figure 4-2...
  • Page 30 H.265+ 16-ch 4K Network Video Recorder NVR-1600 ○ 3 Go to the "Date and Time" interface, configure the Device date and time, and click "Next". ○ Figure 4-2 ○ 4 Go to the "Network Setup" interface, configure the network parameters of the device. Click "Next".
  • Page 31 H.265+ 16-ch 4K Network Video Recorder NVR-1600 ○ 5 Go to the "Camera" interface, you can search for and add devices and click "Next". ○ Figure 4-2 ○ 6 Go to the "Hard Disk" interface, you can check the hard disk usage status: When the status shows "In Use", please click "Next".
  • Page 32 H.265+ 16-ch 4K Network Video Recorder NVR-1600 ○ 7 Go to the "Change Password" interface, setting system password and security questions according to your actual needs, click "Complete", the boot wizard is set ○ Figure 4-2 On the startup wizard screen, click " Exit → Confirm ...

  • Page 33: Forget Password

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 4.2.2 Forget Password If you forget your password, you can click "Forget password" on the login page to enter the Forget Password interface to reset the password (as shown in Figure 4-3). There are three ways to reset the password: "Answer the question", "Import Key"...
  • Page 34 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Answer The Question: Select the three security questions when setting the password and enter the answer to the corresponding question, click "Next Step" to enter the new password setting interface, as shown in Figure 4-4.
  • Page 35 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Import Key: Select the authentication method as "Import Key", as shown in Figure 4-5. Figure 4-5 ○ 1 Insert the USB disk (The key file is exported when the device setting password is stored.) on the device, and click "Import" to import the key file into the device.
  • Page 36 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Dynamic Password: Select the authentication method as "Dynamic Password", as shown in Figure 4-7. Figure 4-7 ○ 1 Contact the supplier to get the security code. Enter the location of the security code, and click "Next Step".

  • Page 37: Preview Interface

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 4.3 Preview Interface After the system is fully booted, it will enter into the default preview interface, as shown in Figure 4-8. Figure 4-8 After the device normally starts up, the default setting is to preview in multi-screen display mode.

  • Page 38: Quick Add Device

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 4.4 Quick add device Quick add device is shown in Figure 4-9: ○ 1 At the preview menu, for the channel of unconnected IP Camera, click "+" icon. ○ Figure 4-9...
  • Page 39 H.265+ 16-ch 4K Network Video Recorder NVR-1600 ○ 2 Select the device to add and click " " to add. ○ Figure 4-9  Search: Click "Refresh" to automatically search all online IP devices in the LAN.  Add: Add selected device.

  • Page 40: Chapter 5 Nvr Menu

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Chapter 5 NVR Menu 5.1 Shortcut menu After adding a device to a channel, click the channel. The shortcut menu appears as shown in Figure 5-1. Figure 5-1...
  • Page 41 H.265+ 16-ch 4K Network Video Recorder NVR-1600 The shortcut menu icons and specific functions are shown in Table 5-1 below: Icon Function Exit Full Screen The split screen is divided into 1, 4, 9, 16 split screen display according to the number of connected devices...

  • Page 42: Main Menu

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.2 Main Menu After logging in to the system, click the right mouse button and select Exit Full Screen to enter the main menu interface. The main menu includes preview, playback, search, configuration, maintenance, alarm information, download, QR code, and power supply, as shown in Figure 5-2.
  • Page 43 H.265+ 16-ch 4K Network Video Recorder NVR-1600 The main menu icons and specific functions are shown in Table 5-2 below: Icon Function Click to enter the preview interface. (Detailed operation as 5.3.1) Click to enter the playback interface. (Detailed operation as 5.3.2)

  • Page 44: Preview

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.3 Preview In the main menu, click " " to enter the preview interface, as shown in Figure 5-3: Figure 5-3...

  • Page 45: Channel Shortcut Menu

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.3.1 Channel shortcut menu After adding a device to a channel, click the channel. The shortcut menu appears as shown in Figure 5-4. Figure 5-4 The function of each icon is shown in the following table:...

  • Page 46: Ptz

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.3.2 PTZ Click " " on the channel connected to PTZ to enter the PTZ setting interface, where you can perform operations such as PTZ speed, direction and zoom, as shown in Figure 5-5: Figure 5-5 ...
  • Page 47 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Channel: The channel where the PTZ device is located.  Zoom: Click " " to adjust camera zoom in/out.  Focus: Click " " to adjust camera focusing.  Iris: Click "...

  • Page 48: Image Configuration

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.3.3 Image Configuration In the image configuration interface, you can set the image parameters such as brightness, contrast, saturation, sharpness, etc. The steps for image setup are as follows: Step 1: Click "...
  • Page 49 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Image adjustment: According to the actual environment, you can Adjust the brightness, contrast, saturation and sharpness of the preview screen by dragging the progress bar. You can also set the value behind the progress bar, "Brightness", "Contrast", "Saturation", "Sharpness".

  • Page 50: Playback

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.4 Playback 5.4.1 Playback channel video In the main menu, click " " to enter the video playback interface, as shown in Figure 5-8. Figure 5-8 The interface description is shown in the following table:...
  • Page 51 H.265+ 16-ch 4K Network Video Recorder NVR-1600 (multiple channels can be selected at the same time, depending on the device performance) Dates with colored dots on the calendar indicate that there is video recording, and dates without color dots indicate that there is no recording on Calendar that day.
  • Page 52 H.265+ 16-ch 4K Network Video Recorder NVR-1600 : Electronic zoom Menu : Turn volume on / off hide : Add tags : Clip Table 5-4  Playback Retrieve the corresponding video files according to the channel, date and video type, and play the video files in sequence from the playback bar that meets the conditions.
  • Page 53 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-9  Multi-channel playback 1. Select multiple channels, date and recording type to be played back. 2. Click " ", the display interface starts multi-channel synchronous playback video, as shown in Figure 5-10 below.

  • Page 54: Playback Assistance Function

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.4.2 Playback assistance function  Electronic zoom The specific operation steps are as follows: Step 1: In the main menu, click " " to enter the video playback interface. Step 2: Select the channel for video playback and the date when the video is recorded, and the searched video will be displayed on the progress bar.
  • Page 55 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Enter the Electronic zoom interface, the default  image is enlarged; the maximum magnification of the image is 16 times. When enlarging an image, the center of the image is  enlarged by default. Hold down the left mouse button and drag the image to switch to the area to be enlarged.
  • Page 56 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-12  After adding the tag, the system will automatically clip and save the 10 second video before and after the tagging time.
  • Page 57 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Clip It supports clip video files during video playback. The specific operation steps are as follows: Step 1: In the main menu, click " " to enter the video playback interface. Step 2: Select the channel for video playback and the date when the video is recorded, and the searched video will be displayed on the progress bar.
  • Page 58 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 4: Click "Save" to export clips to USB flash drive, as shown in Figure 5- 14 below. Figure 5-14...

  • Page 59: Search

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.5 Search 5.5.1 Video The specific operation steps are as follows: Step 1: On the main menu page, select " Search → Video " to enter the video search interface, as shown in Figure 5-15 below.
  • Page 60 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Video: Choose to find the video file type, there are normal events, motion detection, alarm types.  Tag: Select a tag, and then enter the tag content to find matching video files according to the tag content.

  • Page 61: Smart

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.5.2 Smart The specific operation steps are as follows: Step 1: On the main menu page, select " Search → Smart " to enter the smart event search interface, as shown in Figure 5-16 below.
  • Page 62 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Smart: Choose to find the video file type, there are regional detection, line crossing, loitering, people gathering detection.  Channel: Select the channel.  Start/End Time: Select the start and end time of the search file.

  • Page 63: Picture

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.5.3 Picture The specific operation steps are as follows: Step 1: On the main menu page, select " Search → Smart " to enter the smart event search interface, as shown in Figure 5-17 below.
  • Page 64 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Picture: Choose to find the picture file type, there are manual, motion detection, alarm, regional detection, line crossing, loitering, people gathering detection.  Channel: Select the channel.  Start/End Time: Select the start and end time of the search file.

  • Page 65: Log

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.5.4 Log The specific operation steps are as follows: Step 1: On the main menu page, select " Search → Log " to enter the log search interface, as shown in Figure 5-18 below.

  • Page 66: Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.6 Config Config is composed of easy mode and expert mode. 5.6.1 Easy Mode 5.6.1.1 System Config  Common Config In the system config interface, click " Config → Easy Mode → System Config →...
  • Page 67 H.265+ 16-ch 4K Network Video Recorder NVR-1600  System Time: Display the time of the current device, click the time display bar to pop up the calendar and time bar, you can manually modify the system time, turn on the NTP time calibration and then turn it to gray.
  • Page 68 H.265+ 16-ch 4K Network Video Recorder NVR-1600 CAUTION  In order to improve the security of the product's network use, please update the product password regularly. It is recommended to update and maintain it every 3 months. If you have high security...
  • Page 69 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-20  User list: Displays all current users of the device; the administrator can only change its password, not its permissions. Step 2: Click "Add" to enter the permission confirmation interface, first confirm the password, as shown in Figure 5-21 below.
  • Page 70 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Enter the administrator password, click "Save", after the permission is confirmed, you can enter the add user interface to add users, as shown in Figure 5-22 below. Figure 5-22 Step 4: Choose a level, enter the new user information (user name, password, confirm password), select the level, click "Save".
  • Page 71 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Local Config  Local Param Setup: set parameters, restore default parameters, import / export parameters.  Local Channel Setup: Add, delete, modify, import and export configuration files for the IP channel. ...
  • Page 72 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Channel Config  Local Preview: Preview live video of each channel locally, this permission is detailed for each channel.  Remote Preview: Preview live video of each channel remotely, this permission is detailed for each channel.
  • Page 73 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 6: Click "Save" to save the set permissions and return to the user management interface, as shown in Figure 5-23 below. Figure 5-23  Modify the user The specific operation steps are as follows: Step 1: In the main menu, choose "...
  • Page 74 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Modify user’s password as needed, click "Save".  When administrator changing the password, an unlock pattern can be set at the same time, and the user will have one more way to login to the device.
  • Page 75 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-25 Step 3: Modify the user's local permissions and remote permissions as needed, and click "Save" to complete the modification.  Abnormal Config Set the alarm mode of abnormal events. When an abnormal event occurs during the operation of the NVR device, the system executes the alarm linkage action.
  • Page 76 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 1: In the main menu, choose " Config → Easy Mode → System Config → Exception " to enter Exception setting interface, as shown in Figure 5-26 below. Figure 5-26 Step 2: Select the event type, click "...

  • Page 77: Network Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.6.1.2 Network Config  Basic Config Set the IP address, DNS server and other information of the NVR device to ensure that it can communicate with other devices in the network.  If the device is used for network monitoring, the network must be set up for normal use.
  • Page 78 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Configure IP Address, Network Mask, Gateway, Primary DNS and other related network parameters. Step 3: Click "Apply" to save the setting.  IP Address: Enter the IP address of NVR. ...
  • Page 79 H.265+ 16-ch 4K Network Video Recorder NVR-1600 You can add devices in the following two ways to manage multiple devices. 1) Scan the QR code for the mobile phone system, download the App and register the account. For details, see the App User Manual on the website.
  • Page 80 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Make sure that the NVR accesses the external network, choose " Enable P2P → Encryption ". Step 3: Click "Apply" to save the configuration. Step 4: The connect status shows "Online ". This indicates that P2P is enabled and can be used normally.
  • Page 81 H.265+ 16-ch 4K Network Video Recorder NVR-1600 After login, click " Device Management → → SN Add ", Align the QR code on the device body or P2P interface to scan → enter the device username, password and verification code after scan the QR code (the verification code printed on the label), click "Add"...
  • Page 82 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-29 Step 2: Enable e-mail alarm notifications, configure SMTP server, SMTP port, user name, password, sender, subject, message interval, and select encryption type, attach file and other parameters. Step 3: Click "Test" and the message "Success. Check the inbox." is displayed.
  • Page 83 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Enable: Enable / disable mail sending.  SMTP Server: Select the SMTP sever type.  SMTP Port: Please input corresponding port value here.  User Name: Please input the user name to login the sender email box.

  • Page 84: Channel Manage

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.6.1.3 Channel Manage  Channel Config  Add Device After adding a remote device, you can view the video screen of the remote device directly on the NVR, and perform operations such as storage and management.
  • Page 85 H.265+ 16-ch 4K Network Video Recorder NVR-1600 The specific operation steps are as follows: Step 1: In the main menu, click " Config → Easy Mode → Channel Manage → Channel Config " to enter Add Camera interface, as shown in Figure 5-30.
  • Page 86 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Choose the device you want to add, click "Add", as shown in Figure 5-32 below. Figure 5-32  Auto Add: Click NVR to modify all camera IP and other network parameters in the LAN, and connect it to NVR.
  • Page 87 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-33  IP: Need to add IPC IP address.  Protocol: Select Add Device Protocol with Onvif, Private options.  Port: Access to the port used by IPC, the default is 80.
  • Page 88 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Update IPC: Select one or more upgrade devices of the same type, insert the U disk storing the upgrade package of the device into the NVR, click "Upgrade", the system will find the upgrade package in the U disk and display it, select the upgrade package, click "Upgrade"...
  • Page 89 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-34 Step 2: Select the channel to set the OSD. Step 3: Set the OSD of the channel. Step 4: Click "Apply" to save the setting. OSD includes channel name, time, text, date format, ...
  • Page 90 H.265+ 16-ch 4K Network Video Recorder NVR-1600 The specific operation steps are as follows: Step 1: In the main menu, choose " Config → Easy Mode → Event Config → Motion Detection / Video Tampering " to enter Motion Detection interface, as shown in Figure 5-35 below.
  • Page 91 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-36 Step 4: Click "Arming Schedule" to enter Arming Schedule interface, as shown in Figure 5-37 below. Draw the arming time in the drawing area, or click "Edit Time" to set the day of the week and time period 1～8.
  • Page 92 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 5: Click "Linkage" to enter Linkage interface, Set normal linkage and alarm output as required, as shown in Figure 5-38 below. Figure 5-38 Step 6: Click "Apply" to save the setting. If you need to set motion detection for other channels, ...
  • Page 93 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Channel: Select to set the channel.  Enable: Check " " to turn on / off motion detection alarm.  Set Area: Select all areas by default, click to enter the area setting interface, set the range of the dynamic detection area, press and hold the left mouse button to select the alarm area.
  • Page 94 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 1: In the main menu, choose " Config → Easy Mode → Event Config → Video Loss " to enter Video Loss interface, as shown in Figure 5-39 below. Figure 5-39 Step 2: Choose a channel, and enable the video loss.

  • Page 95: Record Manage

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.6.1.4 Record Manage  Record Plan NVR supports two recording plan, drawing method and editing method.  Set the recording plan by drawing method The specific operation steps are as follows: Step 1: In the main menu, click " Config → Easy Mode → Record Manage →...
  • Page 96 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-41 Step 4: Repeat Step 3 to set up a complete recording plan. Step 5: After the recording plan is set, the channel presents the type (color) of the recording plan, as shown in Figure 5-42 below.
  • Page 97 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Set the recording plan by editing method The specific operation steps are as follows: Step 1: In the main menu, click " Config → Easy Mode → Record Manage → Record Plan " to enter record plan setup interface.
  • Page 98 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Record Type: Select check the box to select corresponding record type. There are Normal, Motion, Alarm, and Intelligent.  Week day: Select the week number. If you select "All", it means to the entire week, or you can select "...
  • Page 99 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-45 Record Param  Record Param interface is used for recording parameter configuration. The specific operation steps are as follows: Step 1: In the main menu, click " Config → Record Manage → Record Param "...
  • Page 100 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-46 Step 2: Set recording parameters, please refer to Table 5-5 for specific parameter descriptions. Name Details Setting Channel Select the channel to set recording parameters Record Set There are two types of video...
  • Page 101 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Resolution Resolution refers to the number of Select through the pixels contained in a unit length. drop-down box. NOTE: The encoding resolution is related to the IP device. Stream Type The stream type is Video & Audio...
  • Page 102 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Click "Apply" to save the setting.  Storage Device The storage device is used to format the hard disk and view the hard disk's applicable status and capacity.  Disk Management...
  • Page 103 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Select the hard drive that needs to be formatted, click "Format", as shown in Figure 5-48 below. Figure 5-48 Step 3: Wait for the formatting progress bar to finish, click "Close", the NVR will restart and complete the format.
  • Page 104 H.265+ 16-ch 4K Network Video Recorder NVR-1600 "No Disk" indicates that the device is not connected or  the hard disk is not detected.  The hard disk must be formatted first when the hard disk is connected to the NVR for the first time or when "Not formatted"...
  • Page 105 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-49 Step 2: Select " Enable → Google " to obtain the "Authorization Code". Follow the prompts to log in to the website on the computer and enter the "Authorization Code" to bind the Google server cloud service.

  • Page 106: Expert Mode

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.6.2 Expert Mode 5.6.2.1 System Config  Common Config In Common Config interface, you can view and set the NVR language, time zone, date format, system time, resolution, device name, screen saver time, mouse movement speed, enable or disable daylight saving time, boot wizard, operation password function.
  • Page 107 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Set the language, time zone, date format, daylight saving time and other information of the device as required.  Language: Set the default language of the system, currently supports Simplified Chinese, Traditional Chinese, English, Polish,...
  • Page 108 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Click "Apply" to save the setting.  Preview Config  Carousel The device supports the carousel function. After setting, the system will play video frames in turn according to the split screen. After each group of...
  • Page 109 H.265+ 16-ch 4K Network Video Recorder NVR-1600  User Config  The factory default administrator user name is admin and the password is admin.  Administrators can add and delete users and configure user parameters.  The user level has two levels, the Operator and the General user.
  • Page 110 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-52 Step 2: Click "Add" to enter the permission confirmation interface, first confirm the password, as shown in Figure 5-53 below. Figure 5-53...
  • Page 111 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Enter the administrator password, click "Save", after the permission is confirmed, you can enter the add user interface to add users, as shown in Figure 5-54 below. Figure 5-54 Step 4: Choose a level, enter the new user information (user name, password, confirm password), select the level, click "Save".
  • Page 112 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Local Config  Local Param Setup: set parameters, restore default parameters, import / export parameters.  Local Channel Setup: Add, delete, modify, import and export configuration files for the IP channel. ...
  • Page 113 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Channel Config  Local Preview: Preview live video of each channel locally, this permission is detailed for each channel.  Remote Preview: Preview live video of each channel remotely, this permission is detailed for each channel.
  • Page 114 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 6: Click "Save" to save the set permissions and return to the user management interface, as shown in Figure 5-55 below. Figure 5-55...

  • Page 115: Network Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.6.2.2 Network Config  Basic Config  TCP/IP Set the IP address, DNS server and other information of the NVR device to ensure that it can communicate with other devices in the network.
  • Page 116 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Configure IP Address, Network Mask, Gateway, Primary DNS and other related network parameters. Step 3: Click "Apply" to save the setting.  IP Address: Enter the IP address of NVR. ...
  • Page 117 H.265+ 16-ch 4K Network Video Recorder NVR-1600 The IP address and the default gateway must be in  the same network segment.  If NVR enabled DHCP is in effect and you turn off DHCP, you cannot display the original IP information.
  • Page 118 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-57 Step 2: Enable DDNS, select the DDNS type, and enter the refresh time (Sec), username, and password. Step 3: Click "Apply" to save the DDNS setting. Step 4: Enter the domain name in the PC web browser and press "Enter".
  • Page 119 H.265+ 16-ch 4K Network Video Recorder NVR-1600  User Name: The account registered in the DNS service provider.  Password: The password to the account registered in the DNS service provider.  Domain: The domain name registered in the DNS service provider.
  • Page 120 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-58 Step 2: Select "Enable", input the user name and password of the PPPoE. Step 3: Click "Apply" to save the configuration.  Enable: Turn on/off the device PPPoE function. User Name: The PPPoE user name provided by the ISP (Internet ...
  • Page 121 H.265+ 16-ch 4K Network Video Recorder NVR-1600  After enable NTP (Network Time Protocol), the system can periodically adjust the device time through the NTP server to ensure the accuracy of the device system time. The specific operation steps are as follows: Step 1: In the main menu, click "...
  • Page 122 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Click "Apply" to save the setting.  With FTP (File Transfer Protocol) server, you can store alarm pictures on the FTP server. Prerequisites: You need to purchase or download the FTP service tool and install the software on your PC.
  • Page 123 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Select "Enable FTP" and enter parameters such as the FTP Server, FTP Port, User Name, Password, and the File Upload path. Step 3: Click "Apply" to save the configuration. Step 4: Click "Test" to determine whether the network connection and FTP configuration are correct.
  • Page 124 H.265+ 16-ch 4K Network Video Recorder NVR-1600  UPnP After the mapping between the internal network and the external network is established through the UPnP protocol, the external network user can use the external network IP address to directly access the NVR device on the intranet.
  • Page 125 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-61 Step 2: Enable the UPnP function and configure related parameters such as Internal IP, External IP, and port mapping information of the UPnP route. Step 3: Click "Apply" to save the configuration.
  • Page 126 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Internal Port: The port that the local machine needs to map.  External Port: The port mapped on the router.  Add: Click "Add" to increase the mapping, enter the service name, internal port, and external port.
  • Page 127 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Blocklist: 1. NVR cannot connect to IPC's IP address or MAC address in the blocklist. 2. The computer with the IP or MAC address in the blocklist will not be able to log in to the NVR web page.
  • Page 128 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Choose "Restriction Type", such as "Blocklist". Step 3: Click "Add ", choose IP address (or MAC address), input IP address. Step 4: Click "Apply", the IP address or MAC address will be added to the Blocklist of the device.
  • Page 129 H.265+ 16-ch 4K Network Video Recorder NVR-1600  With this function, the device must be connected to an external network; otherwise it will not work properly. The specific operation steps are as follows: Step 1: On the main menu page, click " Config → Expert Mode → Network Config →...
  • Page 130 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Connect Status: Display device P2P online status.  Enable: Turn on / off device P2P function, the default is "Online".  Encryption: Select the encryption type. After the device is enabled, all signaling communication between the device and the server is encrypted.
  • Page 131 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 4: Real-time preview In the main interface, click " Real Time → " → choose the device you want to view the preview, click "Done", choose a channel to play the real time video.
  • Page 132 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: choose " Config channel → Enable ", click "Apply", the IPEYE client IP address will be shown on the interface, as shown in Figure 5-65 below: Figure 5-65 Step 3: Log in to IPEYE Client http://192.168.1.88:8282, enter the IPEYE and XVR accounts and passwords, select the device to enable IPEYE, and click "Add to Cloud"...
  • Page 133 H.265+ 16-ch 4K Network Video Recorder NVR-1600  New user please log in http://www.ipeye.ru/ register an account. Step 3: Log in to http://www.ipeye.ru/ and enter the IPEYE device list to view the newly added device name as "cloud_xxxxx", and click "...
  • Page 134 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-67 Step 2: Enable e-mail alarm notifications, configure SMTP server, SMTP port, user name, password, sender, subject, message interval, and select encryption type, attach file and other parameters. Step 3: Click "Test" and the message "Success. Check the inbox." is displayed.
  • Page 135 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Subject: Please input email subject here. System support English character and Arabic number, default "XNVR_ALERT ".  Encryption: Select the Mailbox server encryption, including NONE, SSL, TLS, and default "SSL".  Attach File: Turn on/off the email attachment function. After the alarm is turned on, the system can send snap shots when the alarm is sent.

  • Page 136: Channel Manage

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.6.2.3 Channel Manage  Channel Config  Add Device After adding a remote device, you can view the video screen of the remote device directly on the NVR, and perform operations such as storage and management.
  • Page 137 H.265+ 16-ch 4K Network Video Recorder NVR-1600 The specific operation steps are as follows: Step 1: In the main menu, click " Config → Expert Mode → Channel Manage → Channel Config " to enter Add Camera interface, as shown in Figure 5-68.
  • Page 138 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-69 Step 3: Choose the device you want to add, click "Add", as shown in Figure 5-70 below. Figure 5-70...
  • Page 139 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Auto Add: Click NVR to modify all camera IP and other network parameters in the LAN, and connect it to NVR.  Manual Add: Click to enter the "Channel Setup" interface. You can...
  • Page 140 H.265+ 16-ch 4K Network Video Recorder NVR-1600  IP: Need to add IPC IP address.  Protocol: Select Add Device Protocol with Onvif, Private options.  Port: Access to the port used by IPC, the default is 80.  User Name: The login user name of IPC (if the defaulted user name is not admin, please change it to be valid user name).
  • Page 141 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 1: In the main menu, click " Config → Expert Mode → Channel Manage → OSD Config " to enter OSD config interface, as shown in Figure 5-72 below. Figure 5-72 Step 2: Select the channel to set the OSD.
  • Page 142 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 4: Click "Apply" to save the setting.  Image Config In Image Color interface, the Brightness, Contrast, Saturation and Sharpness of IP channel video can be adjusted, related parameters for the IPC can also be set, such as Exposure, Day And Night Mode, Backlight Compensation, White Balance, Video Adjustment, Image Enhancement.
  • Page 143 H.265+ 16-ch 4K Network Video Recorder NVR-1600  User can drag the slider to adjust the parameters.  The Image adjustment, Fill light, Exposure setting, Backlight setting, White balance, Video adjustment, Image enhancement and Defog mode can be adjusted. ...
  • Page 144 H.265+ 16-ch 4K Network Video Recorder NVR-1600  When the fill light mode is "Night", the fill light of the device is always on.  Filter time: It is used to prevent the ambient light from getting better and the light is frequently turned on and off, and the filtering time is set.
  • Page 145 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Defog: The default is off, and you can select Low, Middle or High from the drop-down menu.  Backlight Compensation: Used to set backlight compensation and strong light compensation.  Backlight Compensation: The default is off, and you can select Left, Right, Up, Down or Middle from the drop-down menu.
  • Page 146 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-74 Step 2: Select the channel for video occlusion. Step 3: Use the mouse to define the occlusion area in the video, as shown in Figure 5-75 below. Figure 5-75...
  • Page 147 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 4: Click "Apply" to save the setting.  Channel: Select Set Channel.  Clear All: Clear all selected areas masks.  Clear Zoom1, 2, 3: Clear the selected occlusion area 1, 2, 3.

  • Page 148: Event Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.6.2.4 Event Config  Ordinary Event  Motion Detection / Video Tampering Motion detection uses computer vision and image processing techniques to analyze the video images to see if there are enough changes in the images.
  • Page 149 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Turn on motion detection and select a channel. Step 3: Set area, sensitivity.  Use the mouse to draw the area that needs motion detection on the channel video, as shown in Figure 5-77 below.
  • Page 150 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-78 Step 5: Click "Linkage" to enter Linkage interface, set normal linkage and alarm output as required, as shown in Figure 5-79 below. Figure 5-79...
  • Page 151 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 6: Click "Apply" to save the setting. If you need to set motion detection for other channels,  please repeat the above steps.  After setting to enable email notification for motion detection, click "...
  • Page 152 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Buzzer Alarm: Check " " to turn on / off the buzzer alarm function.  E-mail Notify: Check " " to turn on / off when the device alerts the mail function.
  • Page 153 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Choose a channel, and enable the video loss. Step 3: Set the arming time and linkage mode as needed. Step 4: Click "Apply" to save the setting.  Screen Tips: When an alarm occurs, the device pops up an alarm screen to show a warning.
  • Page 154 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Select the event type, click " " to enable the exception alarm function, choose the way for linkage (Screen Display, E-mail Notification, and Buzzer Alarm) and alarm output port. Step 3: Click "Apply" to save the setting.
  • Page 155 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-82 Step 3: Click " Enable → Set ", to set the rule of line crossing detection, the specific steps are shown as below: 1. In the "Rules" drop-down list, select any rule as you need. Line crossing detection can set 4 rules.
  • Page 156 H.265+ 16-ch 4K Network Video Recorder NVR-1600 3. Click "Draw Rect", move the mouse to the preview screen and click the left mouse button in sequence to draw the two endpoints of the warning line. 4. You can modify the drawn warning line through the "Clear".
  • Page 157 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 6: Click "Apply" to save the setting.  Regional Intrusion The regional intrusion function can detect whether an object in the video enters the set area, and conduct a linkage alarm based on the judgment result.
  • Page 158 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Click " Enable → Set ", to set the rule of regional intrusion detection, the specific steps are shown as below: 1. In the "Rules" drop-down list, select any rule as you need. Regional intrusion detection can set 4 rules.
  • Page 159 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 5: Click "Linkage", set alarm linkage as required (Buzzer alarm, email notification, channel recording, screen prompt) and alarm output and PTZ linkage, as shown in Figure 5-87 below. Figure 5-87 Step 6: Click "Apply" to save the setting.
  • Page 160 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-88 Step 3: Click " Enable → Set ", to set the rule of loitering intrusion detection, the specific steps are shown as below: 1. In the "Rules" drop-down list, select any rule as you need. Loitering detection can set 4 rules.
  • Page 161 H.265+ 16-ch 4K Network Video Recorder NVR-1600 3. Click "Draw Rect", move the mouse to the preview screen and click the left mouse button in sequence to draw the endpoints of the quadrilateral warning zone to complete the zone drawing.
  • Page 162 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 6: Click "Apply" to save the setting.  People Gathering The people gathering function can detect the density of the human body in the set area, if it exceeds the set threshold, it will trigger an alarm linkage.
  • Page 163 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Proportion: Represents the proportion of personnel in the entire warning area, when the proportion of personnel exceeds the set proportion value, the system alarm is triggered, otherwise the system does not alarm.
  • Page 164 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 5: Click "Linkage", set alarm linkage as required (Buzzer alarm, email notification, channel recording, screen prompt) and alarm output and PTZ linkage, as shown in Figure 5-93 below. Figure 5-93 Step 6: Click "Apply" to save the setting.

  • Page 165: Record Manage

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.6.2.5 Record Manage  Record Plan NVR supports two recording plan, drawing method and editing method.  Set the recording plan by drawing method The specific operation steps are as follows: Step 1: In the main menu, click " Config → Expert Mode → Record Manage →...
  • Page 166 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-95 Step 4: Repeat step 3 to set up a complete recording plan. Step 5: After the recording plan is set, the channel presents the type (color) of the recording plan, as shown in Figure 5-96 below.
  • Page 167 H.265+ 16-ch 4K Network Video Recorder NVR-1600  There are 6 time periods available for each day, and the device will start the corresponding type of recording within the set time range.  The smallest unit of the drawing area is 1 hour.
  • Page 168 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Select the recording type of each time period. There are eight time periods for setting each day. Select the corresponding week in "Save" to apply to the corresponding week. Step 4: Click "Save" to complete the setting, the system will return to "Record"...
  • Page 169 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-99 Record Param  Record Param interface is used for recording parameter configuration. The specific operation steps are as follows: Step 1: In the main menu, click " Config → Expert Mode → Record Manage →...
  • Page 170 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-100 Step 2: Set recording parameters, please refer to Table 5-6 for specific parameter descriptions. Name Details Setting Channel Select the channel to set recording parameters Record Set There are two types of video...
  • Page 171 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Resolution Resolution refers to the number of Select through the pixels contained in a unit length. drop-down box. NOTE: The encoding resolution is related to the IP device. Stream Type The stream type is Video & Audio...
  • Page 172 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Click "Apply" to save the setting.  Storage Device  Disk Management The storage device is used to format the hard disk and view the hard disk's applicable status and capacity.
  • Page 173 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 2: Select the hard drive that needs to be formatted, click "Format", as shown in Figure 5-102 below. Figure 5-102 Step 3: Wait for the formatting progress bar to finish, click "Close", the NVR will restart and complete the format.
  • Page 174 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Refresh: Click update disk list information.  "No Disk" indicates that the device is not connected or the hard disk isn’t detected.  The hard disk must be formatted first when the hard disk is connected to the NVR for the first time or when "Not...
  • Page 175 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-103 Step 2: Select "Enable → Google" to obtain the "Authorization Code". Follow the prompts to log in to the website on the computer and enter the "Authorization Code" to bind the Google server cloud service.
  • Page 176 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-104 Step 2: Set the device disk full mode and the time to automatically delete recordings as needed.  S.M.A.R.T S.M.A.R.T is used to monitor the temperature of the hard disk, the surface material of the disk, the motor and its drive system, and analyze and predict the possible problems of the hard disk.
  • Page 177 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-106 Step 2: Select the hard disk to be tested and set "Test Type". Step 3: The device starts to detect the hard disk. Step 4: After the hard disk is detected, the hard disk details will be displayed in the S.M.A.R.T.
  • Page 178 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Only some devices support hard disk detection.  Please refer to the actual situation.  When the self-assessment or overall evaluation results are "not passed", the hard disk must be replaced to avoid data loss.

  • Page 179: Maintain

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.7 Maintain The maintenance interface includes system information, device upgrade, default restoration, automatic maintenance, import and export, and channel information. 5.7.1 System Message The specific operation steps are as follows: Step 1: On the main menu page, select " Maintain → System Message "...

  • Page 180: Device Upgrade

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.7.2 Device Upgrade  Manual Upgrade Insert the USB device with the upgrade file into the NVR to upgrade the version of the NVR. If the device detects the upgrade file in the U disk, the information about the upgrade package (serial number, name, size, date) will be displayed in the list.
  • Page 181 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Click "Refresh", choose the upgrade file, click " Upgrade → Confirm ", wait for the interface to finish the progress bar, and the device will automatically restart to complete the upgrade.
  • Page 182 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 5-109 Step 2: Enable "Automatic Detection". Step 3: Click "Apply", when there is a new version in the cloud, the system will automatically detect the version and upgrade the device at the set time.
  • Page 183 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Before testing a new online version, make sure that  the NVR is properly connected to the network.  During the upgrading process, please do not cut off the power or takeoff your U disk. After the upgrading, your system will restart automatically.

  • Page 184: Restore Default

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.7.3 Restore Default When the NVR device runs slowly or the configuration is wrong, you can try to solve the problem by restoring the default. The specific operation steps are as follows: Step 1: In the main menu, choose " Maintain → Restore Default " to enter restore default interface, as shown in Figure 5-110 below.

  • Page 185: Automatic Maintenance

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.7.4 Automatic Maintenance When the device runs for a long time, you can set the device to restart within an idle time to increase the device's running speed. The specific operation steps are as follows: Step 1: In the main menu, choose "...

  • Page 186: Import And Export

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.7.5 Import And Export If multiple devices need to adopt the same configuration, one device can be configured first, and the configuration file of the device can be "exported" and backed up, and then through the "import" operation, the configuration can be applied to other devices to save more Configure the time.

  • Page 187: Channel Information

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 5.7.6 Channel Information Click "Channel Information" on the maintenance interface to enter the NVR channel information interface, where you can view the resolution of each channel and the IPC version number. As shown in Figure 5-113 below:...

  • Page 188: Chapter 6 Web Operation

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Chapter 6 WEB Operation The NVR supports accessing and managing devices  on the PC through the Web.  The WEB page provides application modules such as real-time, preview, playback, configuration, and logout.
  • Page 189 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 3: Check whether the network between the PC and the NVR device is normal. The method is as follows: When the network between the PC and the NVR device is normal, you can log in to the web interface of the NVR through the PC.

  • Page 190: Browser Login

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.2 Browser Login To make sure NVR connects to Internet successfully, open Browser, input required IP address, the default setting is 192.168.0.20, and enter the login interface, as below Figure 6-1. Figure 6-1...
  • Page 191 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Modify Password: After logging in to the webpage,  the system prompts "The current password is too simple, please modify the password!", click "Modify", enter the new password, confirm the password, set the security question, export the key, click "OK", and complete the password modification.

  • Page 192: Active X Download, Installation

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.3 Active X download, installation The browser plug-in needs to be downloaded and installed when logging into the device for the first time, as shown in Figure 6-2 below, click "Please click here to download the browser plug-in, please close the browser when the download is finished"...
  • Page 193 H.265+ 16-ch 4K Network Video Recorder NVR-1600 WIN7-1 WIN7-2...
  • Page 194 H.265+ 16-ch 4K Network Video Recorder NVR-1600 The Active X can't be loaded. Please adjust the  security level and firewall setting to the lowest, and make some adjustment to Google Chrome as well: Tool-Internet Option- Custom level-ActiveX- enables all the options below ActiveX and click "OK", the Active X will be downloaded and installed automatically, please refer to the Figure 6-3.

  • Page 195: Live View

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.4 Live View After login the client successfully, entering live preview interface. The interface as below Figure 6-4: Figure 6-4 1. System Menu. Including Live View, Playback, Picture, Config, Maintain, Help, Logout, and show login user name.
  • Page 196 H.265+ 16-ch 4K Network Video Recorder NVR-1600 3. Preview channel shortcut button Mark Specification Preview window toggle. From left to right are: 1 split screen, 4 split screen, 9 split screen. According to the number of channels supported by the device, the preview window will be different.
  • Page 197 H.265+ 16-ch 4K Network Video Recorder NVR-1600 4. Image Config:You can select the corresponding channel, set brightness, contrast, saturation, sharpness, enable wide dynamic, mirror, corridor mode, set day and night switching mode and restore default values. 5. PTZ setting operation window...

  • Page 198: Playback

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.5 Playback In the main interface, click "Playback" to enter the playback interface, as shown in Figure 6-5 below. Here you can view the equipment video, capture, download and other actions, the settings and NVR settings consistent.
  • Page 199 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Slow Forward: When the video is played, click " " video will play slowly, the specific speed of choice 1/2, 1/4, 1/8. After switching, you can check the current playback speed in the current status of the upper right corner of the preview interface.
  • Page 200 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 6-6  Full Screen: When the video is played, click " " the full screen playback video. Press "Esc" on the keyboard to exit the full-screen playback interface. Drag and drop: the video playback, the left mouse button click on ...

  • Page 201: Picture

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.6 Picture In the picture interface, you can view and download all the pictures captured on the device side. The steps are as follows: Step 1: In the main interface, click "Picture" to enter the picture interface, as shown in Figure 6-7 below.
  • Page 202 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Step 4: Select the picture, click "Download" to select the storage path, click "OK", and select the image to download to the specified folder. Click on the " " corresponding to the preview position to view the image.

  • Page 203: Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7 Config 6.7.1 System Config 6.7.1.1 Local Configuration In the main interface, click " Config → System Config → Local Configuration " to enter the local configuration interface, as shown in Figure 6-10 below. Here you can set the device video file, capture and clip corresponding to the local computer's save path, click "Browse"...
  • Page 204 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 6-11  Date Setting In the main interface, click " Config → System Configuration → Common Config → Date Setting " to enter the date setting interface, where you can set the device time, as shown in Figure 6-12.
  • Page 205 H.265+ 16-ch 4K Network Video Recorder NVR-1600 【Time Zone】Displays the current device selection time zone. 【Date Format】Select the date format,such as YYYY/MM/DD . 【NTP Calibration Time】 The NVR time will synchronization with network, and you can change the different time zones. (This feature requires that NVR network environment can connect to the Internet.) Click on the...

  • Page 206: User Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 6-13 6.7.1.3 User Config In the main interface, click " Config → System Configuration → User Config " to enter the User management interface, as shown in Figure 6-14 below. Here you can add, delete, edit users, user settings are consistent with the local settings of NVR.

  • Page 207: Network Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7.2 Network Config 6.7.2.1 Basic Config  TCP/IP In the main interface, click " Config → Network Config → Basic Config → TCP/IP " to enter the TCP/IP setting interface, as shown in Figure 6-15 below.
  • Page 208 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 6-16  PPPoE In the main interface, click " Config → Network Config →Basic Config → PPPoE " to enter the PPPoE setting interface, as shown in Figure 6-17 below. Here you can enable and set the PPPoE function, the PPPoE setting is consistent with the local settings of NVR.
  • Page 209 H.265+ 16-ch 4K Network Video Recorder NVR-1600  In the main interface, click " Config → Network Config → Basic Config → FTP " to enter the FTP setting interface, as shown in Figure 6-18 below. Here you can enable and set the FTP server function. The FTP settings are the same as the NVR local settings.
  • Page 210 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 6-19 Block/Allow List  In the main interface, click " Config → Network Config → Basic Config → Block/Allow List " to enter Block/Allow List setting interface, as shown in Figure 6-20 below. Here you can enable and set the Block/Allow List function, Block/Allow List settings are consistent with the NVR local settings.

  • Page 211: P2P

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7.2.2 P2P  In the main interface, click " Config → System → Network → P2P " to enter the P2P setting interface, as shown in Figure 6-21 below. Here you can enable / disable the P2P function, check the serial number of the device,...

  • Page 212: E-Mail

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 6-22 6.7.2.3 E-mail In the main interface, click " Config → System → Network → E-mail " to enter the email setting interface, as shown in Figure 6-23 below. Here you can open and set the mail function. The settings of the E-mail are consistent with the local settings of the NVR.

  • Page 213: Channel Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7.3 Channel Config 6.7.3.1 Channel Config In the main interface, click " Config → Channel Config → Channel Config " to enter the add camera interface, as shown in Figure 6-24 below. Here you can add, edit, and delete devices to the device as needed.

  • Page 214: Image Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 6-25 6.7.3.3 Image Config In the main interface, click " Config → Channel Config → Image Config " to enter the Image setting interface, as shown in Figure 6-26 below. Here you...

  • Page 215: Privacy Mask

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7.3.4 Privacy Mask In the main interface, click " Config → Channel Config → Privacy Mask " to enter the privacy mask setting interface, as shown in Figure 6-27 below. Here you can set three shielding areas, and the relevant parameters are consistent with the local settings of the NVR.

  • Page 216: Event Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7.4 Event Config 6.7.4.1 Ordinary Event  Motion / Viedo Tampering In the main interface, click " Config → Event Config → Ordinary Event → Motion / Video Tampering " to enter the motion detection setting interface, as shown in Figure 6-28 below.
  • Page 217 H.265+ 16-ch 4K Network Video Recorder NVR-1600 Figure 6-29  Buzzer In the main interface, click " Config → Event Config → Ordinary Event → Buzzer " to enter the buzzer alarm setting interface, as shown in Figure 6-30 below. Here you could set the duration of the buzzer alarm. The related parameters are consistent with the local settings of the NVR.
  • Page 218 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Exception In the main interface, click " Config → Event Config → Ordinary Event → Exception " to enter the exception setting interface, as shown in Figure 6-31 below. Here you could set the abnormal alarm (No Disk, Disk Error, Broken Network, IP Conflict).

  • Page 219: Smart Event

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7.4.2 Smart Event  Line Crossing Detection In the main interface, click " Config → Event Config → Smart Event → Line Crossing Detection " to enter the Crossover detection setting interface, as shown in Figure 6-32 below.
  • Page 220 H.265+ 16-ch 4K Network Video Recorder NVR-1600  Loitering In the main interface, click " Config → Event Config → Smart Event → Loitering " to enter the Wandering detection setting interface, as shown in Figure 6-34 below. Here you could set the alarm for people stay detection.

  • Page 221: Record Manage

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7.5 Record Manage 6.7.5.1 Record Plan In the main interface, click " Config → Record Manage → Record Plan " to enter the record plan setting interface, as shown in Figure 6-36 below. The relevant parameters are consistent with the local settings of the NVR.

  • Page 222: Storage Device

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7.5.3 Storage Device  Disk Management In the main interface, click " Config → Record Manage → Storage Device → Disk Management " to enter the disk management interface, as shown in Figure 6-38 below. Here you can view the HDD information of the connected device and format the hard disk.

  • Page 223: Advanced Config

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.7.5.4 Advanced Config  Config In the main interface, click " Config → Record Manage → Advanced Config → Config " to enter Config setting interface, as shown in Figure 6-40 below. In the configuration interface, you can view and set related information such as NVR disk full and automatic deletion of recordings, the specific setting steps are consistent with the NVR local settings.

  • Page 224: Maintain

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.8 Maintain 6.8.1 System Message In the System Configuration interface, click "System Message" to enter the device information configuration interface, where you can view the basic information of the current device, as shown in Figure 6-42: Figure 6-42 【Device Name】The name of the current NVR.

  • Page 225: Device Upgrade

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.8.2 Device Upgrade In the Maintain interface, click "Device Upgrade" to enter the device upgrade interface, where you can manual upgrade, online upgrade, as shown in Figure 6-43. Figure 6-43 【Manual Upgrade】Clicking “Browse” to add upgrade file package, and upgrading the NVR program.

  • Page 226: Restore Default

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.8.3 Restore Default In the maintain interface, click "Restore Default" to enter the device recovery default interface, where you can reset device parameters and reset all the parameters to the factory default, as shown in Figure 6-44.

  • Page 227: Automatic Maintenance

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.8.4 Automatic Maintenance In the maintain interface, click "Automatic Maintenance" to enter the scheduled reboot settings interface, where you can set the time for the device to restart, set the restart "cycle" in the drop-down menu, for example, set "3:03 on the 3rd of each month"...

  • Page 228: Import And Export

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.8.5 Import And Export In the maintain interface, click "Import And Export" to enter the device parameters import and export interface, where you can export device parameters or import the parameters file to NVR , as shown in Figure 6-46.

  • Page 229: Log

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 6.8.7 Log In the maintain interface click on the "Log" into the log search interface, where you can query the device alarm and all other relevant information. As shown in Figure 6-48. Figure 6-48 【Search】Set the date and start time of the log query, click "Search", the...

  • Page 230: Chapter 7 Appendixes

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 Chapter 7 Appendixes 7.1 Q&A 1. How to do when can’t detect the hard disk? Answer: If the system does not detect the hard disk, kindly please check the data line and the power line of hard disk whether are connected well,...
  • Page 231 H.265+ 16-ch 4K Network Video Recorder NVR-1600 5. Whether can playback when recording? Answer: Yes. 6. Whether can remove a part of video recordings of hard disk of NVR? Answer: Considering the security of document, you can’t remove a part of video recording, if you need remove all video recordings, you can format the hard disk.

  • Page 232: Maintenance

    H.265+ 16-ch 4K Network Video Recorder NVR-1600 7.2 Maintenance 1. When NVR shutdowns, kindly please don’t turn off the power switch directly, should use the shutdown button of system to avoid data loss or damage of the hard disk. 2. Ensure NVR away from high temperature heat source and place.

Table of Contents